ProjectView

Filter
Contributing Groups
States
Types
By Date:

All Projects

NameascendingStart DateCompletion DateState% Complete
page=projects&type=projects
page=projects&type=project

R4WG13 -- ANSI/CEA-2043, Set-top Box (STB) Power Measurement

  • Progress Report: Email Ballot Issued 11/27/12 and closed 12/28/12
  • Project Contact: Mark Levine
  • Contributing Groups: R04 Video Systems Committee, R04 WG13 STB and TV Energy Consumption, CTA Staff
  • Contributions: 53
  • Last Updated: 2013-07-09 9:23 AM
  • Latest Contribution: 2015-10-15 11:40 AM

This standard defines a method for measuring Set-top Box power consumption using the measurement parameters of the International Electrotechnical Commission standard “IEC62087: METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO AND RELATED EQUIPMENT”. This standard clarifies test procedures, definitions, terms, and provides localization for North American markets.

R4WG13 -- ANSI/CEA-2043, Set-top Box (STB) Power Measurement
2011-08-032013-05-17Approved
100%
page=projects&type=project

R4WG13 -- ANSI/CTA-2043-A, Set-top Box (STB) Power Measurement

  • Progress Report: PVC opened 8/7 and closed 821
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG13 STB and TV Energy Consumption
  • Contributions: 28
  • Last Updated: 2020-08-24 9:33 AM
  • Latest Contribution: 2019-12-12 12:20 PM

This standard defines procedures for measuring Set-top Box power consumption. CTA-2043 includes procedures for measuring power consumption for a broad variety of STB types and features, and therefore not all test procedures are applicable to all STBs. The entity specifying the use of CTA-2043 for STB power measurement is expected to select which procedures are required for the STB being tested and is expected to define predetermined testing parameters required by the test procedures chosen.

R4WG13 -- ANSI/CTA-2043-A, Set-top Box (STB) Power Measurement
2018-03-202019-12-20Published
100%
page=projects&type=project

R4WG14 -- CTA-CEB16-B -- Active Format Description (AFD) & Bar Data Recommended Practice

  • Progress Report: CPP opened 3/23-17, closes 4/7/17.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG14 AFD & Bar Data
  • Contributions: 8
  • Last Updated: 2022-02-24 12:33 PM
  • Latest Contribution: 2020-04-06 1:21 PM

This bulletin, CTA-CEB16-B, provides guidance for the development and implementation of consumer devices that process information related to aspect ratio signaling, Active Format Description (AFD) and bar data. Such devices may respond to this signaling by creating an optimum (or more desirable) display, by passing this signaling through to an analog or digital output, or in preparation of a digital recording.

R4WG14 -- CTA-CEB16-B -- Active Format Description (AFD) & Bar Data Recommended Practice
2017-03-232022-02-24Published
100%
page=projects&type=project

R4WG15 -- CEA-CEB20 R-20XX -- A/V Synchronization Processing Recommended Practice

  • Progress Report: Ballot underway *NOTE: EP-23-O completed balloting and was approved on 12/13/13. However, CEA-CEB20-R-20XX was developed and balloted under EP-23-N. Therefore, the voting process will complete in accordance with EP-23-N.
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG15 A/V Synchronization
  • Contributions: 9
  • Last Updated: 2019-02-01 12:09 PM
  • Latest Contribution: 2015-10-15 12:10 PM

This Recommended Practice outlines the steps that an MPEG decoder should take to ensure and maintain audio/video synchronization. Such synchronization is necessary for end-viewer satisfaction.

R4WG15 -- CEA-CEB20 R-20XX -- A/V Synchronization Processing Recommended Practice
2013-08-152014-02-18Published
100%
page=projects&type=project

R4WG16 -- CEA-2038 -- Command-Driven IR-Synchronized Active Eyewear Standard

  • Progress Report: Published.
  • Project Contact: Mark Levine
  • Contributing Groups: R04 Video Systems Committee, CTA Staff, R04 WG16 3D Technologies
  • Contributions: 116
  • Last Updated: 2013-12-23 12:27 PM
  • Latest Contribution: 2017-02-01 10:40 AM

This standard describes a standard for eyeware that is required to view 3D content from displays. This document relates to both active and passive eyeware used in 3D consumer electronic systems in the home. In the case of active glasses, it standardizes interfaces, signaling, setup, control and polarization.

R4WG16 -- CEA-2038 -- Command-Driven IR-Synchronized Active Eyewear Standard
2009-07-312013-11-12Published
100%
page=projects&type=project

R4WG17 -- CEA-23-B R-2014, Measurement Procedures for Determining Compliance with FCC Rules for "Cable-Ready Consumer Electronics Equipment

  • Progress Report: Ballot closed on 7/18/14. Failed due to lack of quorum. Will request to R4 Chair that this ballot be opened back up for 2 weeks to reach quorum. Due to lack of quorum this email ballot was opened up on 8/7/14 and will close on 8/21/14.
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG17 RF Cable Compatibility
  • Contributions: 11
  • Last Updated: 2018-08-02 8:02 AM
  • Latest Contribution: 2016-02-09 11:36 AM

CEA-23-B defines the measurement procedures for determining compliance with FCC Rules for "Cable Ready Consumer Electronics Equipment", under 47 C.F.R. ง15.118(c).

R4WG17 -- CEA-23-B R-2014, Measurement Procedures for Determining Compliance with FCC Rules for "Cable-Ready Consumer Electronics Equipment
2014-05-082014-10-08Published
100%
page=projects&type=project

R4WG17 -- CEA-544-C R-2014, Low Frequency Immunity of Tuners in A Cable System

  • Progress Report: Ballot closed on 7/18/14. Failed due to lack of quorum. Will request to R4 Chair that this ballot be opened back up for 2 weeks to reach quorum.New
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG17 RF Cable Compatibility
  • Contributions: 9
  • Last Updated: 2018-12-03 10:50 AM
  • Latest Contribution: 2016-02-09 11:43 AM

CEA-544-C defines the measurement procedures for the low frequency (5-54 MHz) immunity of tuners in a cable system, based on requirements in FCC regulations that define the assumed levels of the desired signal, low frequency interference and the required receiver immunity. These procedures define the specific tests needed to determine compliance with the requirements.

R4WG17 -- CEA-544-C R-2014, Low Frequency Immunity of Tuners in A Cable System
2014-05-082014-10-08Published
100%
page=projects&type=project

R4WG18 -- CEA-CEB26 -- Mobile Handheld DTV Implementation Guideline

  • Progress Report: The bulletin was published on March 30, 2012.
  • Project Contact: Alayne Bell
  • Contributing Groups: R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television, CTA Staff
  • Contributions: 98
  • Last Updated: 2012-03-30 6:18 PM
  • Latest Contribution: 2014-10-23 2:04 PM

ATSC-M/H device Implementation guideline is intended to be the consolidated database for providing adequate information and guidelines for all ATSC-M/H stakeholders. This document shall cover the minimum requirements for the ATSC-M/H device, references to specific documents/standards, recommendations and best practices to assure interoperability across different devices, geographies, service providers, application providers, operators, and networks,

R4WG18 -- CEA-CEB26 -- Mobile Handheld DTV Implementation Guideline
2009-10-222012-03-30Published
100%
page=projects&type=project

R4WG18 -- CEA-CEB26-B, Mobile/Handheld DTV Implementation Guidelines

  • Progress Report: CPP issued 8/21/14. Closes on 9/8/14. Ballot opened 9/11/14. Closes 10/10/14. Published 10/29/14
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 12
  • Last Updated: 2014-10-29 1:38 PM
  • Latest Contribution: 2020-05-12 2:00 PM

This ATSC-M/H device implementation guideline is intended to provide guidance to receiving device designers. This document provides explanations of provisions of the ATSC Standard (A/153) along with recommendations for best practices to assure interoperability across different devices, geographies,service providers, application providers, operators, and networks.

R4WG18 -- CEA-CEB26-B, Mobile/Handheld DTV Implementation Guidelines
2014-03-062014-10-29Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB-32.2-A -- Recommended Practice for ATSC 3.0 Television Sets, Physical Layer

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 10
  • Last Updated: 2022-10-19 7:33 AM
  • Latest Contribution: 2023-01-10 6:51 AM

To revise CTA-CEB-32.2 to address at a minimum multiple PLPs, signaling, and multi-frequency networks per updated ATSC 3.0 standards.

R4WG18 -- CTA-CEB-32.2-A -- Recommended Practice for ATSC 3.0 Television Sets, Physical Layer
2021-09-222022-03-10Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB-32.4-B -- Recommended Practice for ATSC 3.0 Television Sets, Video

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 6
  • Last Updated: 2022-10-19 7:32 AM
  • Latest Contribution: 2022-11-28 8:58 AM

CTA-CEB32.4-B makes recommendations to TV receiver manufacturers on how to process the video portion of the signal.

R4WG18 -- CTA-CEB-32.4-B -- Recommended Practice for ATSC 3.0 Television Sets, Video
2021-05-052021-12-31*Voting
80%
page=projects&type=project

R4WG18 -- CTA-CEB-32.5-B -- Recommended Practice for ATSC 3.0 Television Sets, Audio

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 14
  • Last Updated: 2022-10-19 7:31 AM
  • Latest Contribution: 2023-01-10 6:52 AM

This bulletin makes recommendations related to the audio capabilities of ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB-32.5-B -- Recommended Practice for ATSC 3.0 Television Sets, Audio
2021-05-052021-12-31*Voting
80%
page=projects&type=project

R4WG18 -- CTA-CEB32 -- Recommended Practice for ATSC 3.0 Television Sets, Overview

  • Progress Report: PVC started 9/20/19 closes 10/4/19.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 30
  • Last Updated: 2020-08-21 10:31 AM
  • Latest Contribution: 2022-10-17 11:23 AM

This recommended practice gives a high-level overview of recommended and optional items for ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32 -- Recommended Practice for ATSC 3.0 Television Sets, Overview
2015-10-092020-05-13Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32-A -- Recommended Practice for ATSC 3.0 Television Sets, Overview

  • Progress Report: Voting complete.
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 7
  • Last Updated: 2022-11-18 10:35 AM
  • Latest Contribution: 2023-02-08 11:46 AM

This recommended practice gives a high-level overview of recommended and optional items for ATSC 3.0 Television Sets. This revision includes reference alignment.

R4WG18 -- CTA-CEB32-A -- Recommended Practice for ATSC 3.0 Television Sets, Overview
2022-05-112022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32-B -- Recommended Practice for ATSC 3.0 Television Sets, Overview

  • Progress Report: New
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 6
  • Last Updated: 2023-01-31 2:14 PM
  • Latest Contribution: 2023-03-24 6:26 AM

This recommended practice gives a high-level overview of recommended and optional items for ATSC 3.0 Television Sets. This revision includes reference alignment.

R4WG18 -- CTA-CEB32-B -- Recommended Practice for ATSC 3.0 Television Sets, Overview
2023-01-312023-07-31*Draft in Development
0%
page=projects&type=project

R4WG18 -- CTA-CEB32.1-- Recommended Practice for ATSC 3.0 Television Sets, System Integration

  • Progress Report: PVC opened 9/20 closes 10/4/19.
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 30
  • Last Updated: 2019-09-20 11:18 AM
  • Latest Contribution: 2022-11-10 1:47 PM

Develop a recommended practice for system integration for ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.1-- Recommended Practice for ATSC 3.0 Television Sets, System Integration
2017-04-142017-10-27*Pre-Vote Comments
50%
page=projects&type=project

R4WG18 -- CTA-CEB32.10 -- Recommended Practice for ATSC 3.0 Television Sets, Watermarking

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 15
  • Last Updated: 2020-11-18 1:58 PM
  • Latest Contribution: 2020-11-18 11:28 AM

This bulletin documents ATSC 3.0 Television Set recommendations for audio and video watermark reception and processing as defined in ATSC A/334, A/335 and A/336.

R4WG18 -- CTA-CEB32.10 -- Recommended Practice for ATSC 3.0 Television Sets, Watermarking
2020-05-132020-11-16Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.2 -- Recommended Practice for ATSC 3.0 Television Sets, Physical Layer

  • Progress Report: PVC started 2/8 Ballot started 3/7 closes 4/6. Approved 4/20 after Samsung agreed to change their "No" vote to "Yes" and withdraw their comments.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 11
  • Last Updated: 2020-08-24 9:52 AM
  • Latest Contribution: 2022-09-12 8:29 AM

Develop a recommended practice covering physical layer recommendation for ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.2 -- Recommended Practice for ATSC 3.0 Television Sets, Physical Layer
2016-12-192018-04-25Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.3 -- Recommended Practice for ATSC 3.0 Television Sets, Logical Layer

  • Progress Report: PVC started on 9/21/17 ends on 10/6/17
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Master Calendar, CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 23
  • Last Updated: 2020-08-24 9:53 AM
  • Latest Contribution: 2022-09-16 11:52 AM

Develop a recommended practice covering the link and logical layers for an ATSC 3.0 Television Set.

R4WG18 -- CTA-CEB32.3 -- Recommended Practice for ATSC 3.0 Television Sets, Logical Layer
2016-12-192018-02-07Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.3-A -- Recommended Practice for ATSC 3.0 Television Sets, Logical Layer

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG10 Document Maintenance
  • Contributions: 7
  • Last Updated: 2020-11-05 2:05 PM
  • Latest Contribution: 2022-03-11 7:51 AM

R4 to review/revise CEB32.3 including to review/revise/add references and recommendations on Emergency Alert Audio and Emergency Information Audio.

R4WG18 -- CTA-CEB32.3-A -- Recommended Practice for ATSC 3.0 Television Sets, Logical Layer
2019-06-102020-11-04Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.3-B -- ATSC 3.0 Television Sets, Logical Layer

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 15
  • Last Updated: 2022-11-18 10:35 AM
  • Latest Contribution: 2023-01-10 6:51 AM

CTA-CEB32.3-B makes recommendations to TV receiver manufacturers on how to further process the overall signal after it’s initially captured and processed.

R4WG18 -- CTA-CEB32.3-B -- ATSC 3.0 Television Sets, Logical Layer
2021-05-272022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.4 -- Recommended Practice for ATSC 3.0 Television Sets, Video

  • Progress Report: CPP issued 4/21 and closes on 5/7. 2nd CPP issued on 8/1 closes on 8/16 Ballot opened 9/7 and closes on 10/6.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 10
  • Last Updated: 2020-08-24 9:53 AM
  • Latest Contribution: 2022-09-12 8:30 AM

Develop a recommended practice for video for ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.4 -- Recommended Practice for ATSC 3.0 Television Sets, Video
2016-11-042018-02-07Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.4-A -- Recommended Practice for ATSC 3.0 Television Sets, Video

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 13
  • Last Updated: 2020-09-03 8:54 AM
  • Latest Contribution: 2022-10-17 5:58 AM

Develop a recommended practice for video for ATSC 3.0 Television Sets and clarify HFR-related recommendations, including those in the video tables and definitions in CEB32.4.

R4WG18 -- CTA-CEB32.4-A -- Recommended Practice for ATSC 3.0 Television Sets, Video
2020-05-132020-08-20Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.4-B -- Recommended Practice for ATSC 3.0 Television Sets, Video

  • Progress Report: Voting complete.
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 3
  • Last Updated: 2022-11-18 10:35 AM
  • Latest Contribution: 2023-01-10 6:52 AM

Develop a recommended practice for video for ATSC 3.0 Television Sets and clarify HFR-related recommendations, including those in the video tables and definitions in CEB32.4. This revision includes reference alignment.

R4WG18 -- CTA-CEB32.4-B -- Recommended Practice for ATSC 3.0 Television Sets, Video
2022-05-112022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.5 -- Recommended Practice for ATSC 3.0 Television Sets, Audio

  • Progress Report: CPP issued 4/21 closes 5/7/17 Ballot issued 5/17 closes 6/15
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 11
  • Last Updated: 2020-08-05 12:34 PM
  • Latest Contribution: 2022-09-15 8:53 AM

Develop a recommended practice for audio for ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.5 -- Recommended Practice for ATSC 3.0 Television Sets, Audio
2016-11-042017-06-21Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.5-A -- Recommended Practice for ATSC 3.0 Television Sets, Audio

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 16
  • Last Updated: 2020-10-16 11:48 AM
  • Latest Contribution: 2022-10-12 12:25 PM

Revise CEB32.5, Recommended Practice for ATSC 3.0 Television Sets, Audio taking into account comments received, discussed and accepted by R4 WG18.

R4WG18 -- CTA-CEB32.5-A -- Recommended Practice for ATSC 3.0 Television Sets, Audio
2020-08-052020-09-04Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.5-B -- Recommended Practice for ATSC 3.0 Television Sets, Audio

  • Progress Report: Voting complete.
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 3
  • Last Updated: 2022-11-18 10:36 AM
  • Latest Contribution: 2022-11-28 9:01 AM

Revise CEB32.5, Recommended Practice for ATSC 3.0 Television Sets, Audio taking into account comments received, discussed and accepted by R4 WG18. This revision includes reference alignment.

R4WG18 -- CTA-CEB32.5-B -- Recommended Practice for ATSC 3.0 Television Sets, Audio
2022-05-112022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.6 -- Recommended Practice for ATSC 3.0 Television Sets, Advanced Emergency Alert

  • Progress Report: PVC started 3/14 ends 3/29 Ballot starts 4/3 ends 5/3
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 25
  • Last Updated: 2020-08-21 11:49 AM
  • Latest Contribution: 2019-10-07 7:37 PM

Develop a recommended practice for ATSC 3.0 Television Sets, Advanced Emergency Alert

R4WG18 -- CTA-CEB32.6 -- Recommended Practice for ATSC 3.0 Television Sets, Advanced Emergency Alert
2018-02-022018-06-30*Approved
75%
page=projects&type=project

R4WG18 -- CTA-CEB32.6-A -- Advanced Emergency Information Update

  • Progress Report: New
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 WG18 Receivers for Next Generation Broadcast Television, R04 Video Systems Committee
  • Contributions: 39
  • Last Updated: 2022-11-18 10:36 AM
  • Latest Contribution: 2023-01-10 6:53 AM

This project will update CEB-32.6.

R4WG18 -- CTA-CEB32.6-A -- Advanced Emergency Information Update
2022-05-112022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.6-B -- Advanced Emergency Information Update

  • Progress Report: Project initiation
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 21
  • Last Updated: 2022-10-19 7:31 AM
  • Latest Contribution: 2023-03-24 6:26 AM

This project will update CEB32.6-A.

R4WG18 -- CTA-CEB32.6-B -- Advanced Emergency Information Update
2022-09-272023-07-31*Draft in Development
0%
page=projects&type=project

R4WG18 -- CTA-CEB32.8 -- Recommended Practice for ATSC 3.0 Television Sets, Application Run-time Environment

  • Progress Report: PVC started 4/3 ends 4/19 Ballot started 4/24 and ends 5/24. Re-ballot because of substantive "0700 issue" started 9/20 and ends 10/18.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 40
  • Last Updated: 2020-08-21 10:37 AM
  • Latest Contribution: 2022-10-12 12:25 PM

This bulletin makes recommendations related to the interactive application capabilities of ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.8 -- Recommended Practice for ATSC 3.0 Television Sets, Application Run-time Environment
2018-05-092020-03-12Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.8-A - Recommended Practice for ATSC 3.0 Television Sets, Application Runtime Environment

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 18
  • Last Updated: 2022-11-18 10:36 AM
  • Latest Contribution: 2023-01-10 6:53 AM

To revise CTA-CEB32.8 to address at a minimum alignment with current ATSC standards (e.g., A/344) and common industry practices.

R4WG18 -- CTA-CEB32.8-A - Recommended Practice for ATSC 3.0 Television Sets, Application Runtime Environment
2021-09-222022-11-18Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.8-B -- Recommended Practice for ATSC 3.0 Television Sets, Application Run-time Environment

  • Progress Report: This project is underway
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 14
  • Last Updated: 2022-10-19 7:30 AM
  • Latest Contribution: 2023-03-24 6:26 AM

This project will update CEB32.8-A. CEB32.8-A makes recommendations related to the interactive application capabilities of ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.8-B -- Recommended Practice for ATSC 3.0 Television Sets, Application Run-time Environment
2022-09-272023-08-31*Draft in Development
0%
page=projects&type=project

R4WG18 -- CTA-CEB32.9 -- Recommended Practice for ATSC 3.0 Television Sets, Security and Protected Services

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television
  • Contributions: 26
  • Last Updated: 2020-08-21 10:38 AM
  • Latest Contribution: 2022-10-17 5:58 AM

This bulletin makes recommendations related to the security and protected service capabilities of ATSC 3.0 Television Sets.

R4WG18 -- CTA-CEB32.9 -- Recommended Practice for ATSC 3.0 Television Sets, Security and Protected Services
2018-05-092020-05-21Published
100%
page=projects&type=project

R4WG18 -- CTA-CEB32.X -- CEB32 Cross-Reference Alignment Project

  • Progress Report: New
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 WG18 Receivers for Next Generation Broadcast Television, R04 Video Systems Committee
  • Contributions: 38
  • Last Updated: 2022-11-18 10:36 AM
  • Latest Contribution: 2022-11-16 2:38 PM

This project will update and align references for all CEB32 documents.

R4WG18 -- CTA-CEB32.X -- CEB32 Cross-Reference Alignment Project
2022-05-112022-11-18Published
100%
page=projects&type=project

R4WG19 -- CEA-2041 -- Standard for Round Tactile Feedback Feature

  • Progress Report: Published as a CEA standard on May 1, 2012. ANSI public review ends May 13, 2012.
  • Project Contact: Mark Levine
  • Contributing Groups: R04 Video Systems Committee, R04 WG19 Accessibility, CTA Staff
  • Contributions: 40
  • Last Updated: 2012-05-02 12:21 PM
  • Latest Contribution: 2014-01-19 3:56 PM

This standard defines a round tactile feedback feature for remote controls.

R4WG19 -- CEA-2041 -- Standard for Round Tactile Feedback Feature
2010-05-262012-05-02Published
100%
page=projects&type=project

R4WG19 -- CEA-CEB25-A -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics Devices

  • Progress Report: Recirc ballot opened 11/2, closes 12/1
  • Project Contact: Mark Levine
  • Contributing Groups: R04 Video Systems Committee, R04 WG19 Accessibility, CTA Staff
  • Contributions: 16
  • Last Updated: 2017-01-25 3:47 PM
  • Latest Contribution: 2016-12-16 1:11 PM

To develop technical documents related to allowing compatible Common Alert Protocol (CAP) usage among various consumer electronics devices that process CAP-encoded data, independent of delivery method. Such documents may include guidelines for filtering and device response.

R4WG19 -- CEA-CEB25-A -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics Devices
2014-02-242016-12-05Published
100%
page=projects&type=project

R4WG19 -- CTA-2041-A -- Standard for Tactile Indicators

  • Progress Report: PVC Period: Opened 4/19 Closes 5/4.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG19 Accessibility
  • Contributions: 20
  • Last Updated: 2020-08-24 9:54 AM
  • Latest Contribution: 2019-09-28 6:24 AM

This standard defines the size, shape and placement of a tactile indicator ("nib") to assist users who are blind or visually impaired in determining the location of numeric keys on handheld remote controls for consumer electronics products.

R4WG19 -- CTA-2041-A -- Standard for Tactile Indicators
2017-06-222018-08-28Approved
100%
page=projects&type=project

R4WG3 - CTA-CEB35, Recommendations for User Overrides for Closed Caption Decoders

  • Progress Report: PVC started 8/7 and closes 8/21.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee
  • Contributions: 17
  • Last Updated: 2020-08-21 10:42 AM
  • Latest Contribution: 2019-12-11 7:53 AM

Create a recommended practice for mapping caption attributes that relate to user preference overrides among the 608, 708, and IMSC1 formats.

R4WG3 - CTA-CEB35, Recommendations for User Overrides for Closed Caption Decoders
2018-02-012020-02-03Published
100%
page=projects&type=project

R4WG3 -- ANSI/CTA-708-E S-2023 Errata

  • Progress Report: 3/10/2023: Project opened
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG03 Television Data Systems
  • Contributions: 2
  • Last Updated: 2023-03-10 9:32 AM
  • Latest Contribution: 2023-03-10 9:33 AM

This project is to create an Errata to ANSI/CTA-708-E S-2023 that addresses corrections in Section 8.10.5.9 Set Pen Attributes - (SPA).
1) Correction to SetPenAttributes Example "pen size" and "font size".

R4WG3 -- ANSI/CTA-708-E S-2023 Errata
2023-03-102023-04-07*Draft in Development
0%
page=projects&type=project

R4WG3 -- CTA-2115 -- Accessibility Preferences Data Model

  • Progress Report: New
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 WG03 Television Data Systems
  • Contributions: 72
  • Last Updated: 2022-07-29 8:13 AM
  • Latest Contribution: 2023-03-20 6:16 AM

Develop a standard that defines one or more data structures for communicating accessibility settings, including closed captioning display preferences.

R4WG3 -- CTA-2115 -- Accessibility Preferences Data Model
2022-05-112023-03-31*Draft in Development
0%
page=projects&type=project

R4WG3 -- CTA-CEB32.7 -- Recommended Practice for ATSC 3.0 Television Sets, Captions and Subtitles

  • Progress Report: This project was offically moved from R4WG18 to R4WG3 on 6/29/19. During the 5/12/20 meeting R4 reached consensus to cancel the project for CEB32.7 (not viewed as necessary because CEB35 and various CEB32.x docs).
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG18 Receivers for Next Generation Broadcast Television, R04 WG03 Television Data Systems
  • Contributions: 1
  • Last Updated: 2020-05-13 12:28 PM
  • Latest Contribution: 2019-07-01 11:43 AM

Develop ar recommended practice for ATSC 3.0 Television Sets, Captions and Subtitles

R4WG3 -- CTA-CEB32.7 -- Recommended Practice for ATSC 3.0 Television Sets, Captions and Subtitles
2017-04-142017-11-30*Cancelled
0%
page=projects&type=project

R4WG3 – CTA-CEB-35-A – Recommendations for User Overrides for Closed Caption Decoders

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG03 Television Data Systems
  • Contributions: 32
  • Last Updated: 2021-11-08 9:39 AM
  • Latest Contribution: 2021-11-05 10:17 AM

This bulletin describes recommendations for user overrides to styles and attributes for display of closed captions for ANSI/CTA-708 and IMSC1 Captions. Mapping of the CTA-608 datastream within the DTVCC Transport Channel as described in Section 4.3.2 of ANSI/CTA-708 is included for convenience.

R4WG3 – CTA-CEB-35-A – Recommendations for User Overrides for Closed Caption Decoders
2020-12-172021-11-05Published
100%
page=projects&type=project

R4WG5 - ANSI/CTA-2028-C, Color Codes for Outdoor TV Receiving Antennas

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG05 Antenna Standards
  • Contributions: 40
  • Last Updated: 2022-03-24 12:11 PM
  • Latest Contribution: 2022-04-25 12:46 PM

This standard defines color codes to be associated with minimum performance parameters of outdoor television (TV) receiving antennas.

R4WG5 - ANSI/CTA-2028-C, Color Codes for Outdoor TV Receiving Antennas
2021-05-052022-03-21Voting
100%
page=projects&type=project

R4WG5 - CTA-774-E, TV Receiving Antenna Performance Presentation and Measurement

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG05 Antenna Standards
  • Contributions: 37
  • Last Updated: 2022-03-24 12:11 PM
  • Latest Contribution: 2022-04-25 12:48 PM

This standard defines test and measurement procedures for use by manufacturers of television receive antennas who wish to categorize their antennas in accordance with CEA-2028-A, Color Codes for Outdoor TV Receiving Antennas.

R4WG5 - CTA-774-E, TV Receiving Antenna Performance Presentation and Measurement
2021-05-052022-03-21Voting
100%
page=projects&type=project

R4WG5-ANSI/CTA-2032-C, Indoor TV Receiving Antennas Performance Standard

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG05 Antenna Standards
  • Contributions: 34
  • Last Updated: 2022-03-24 12:11 PM
  • Latest Contribution: 2022-04-25 12:43 PM

This standard defines test and measurement procedures for determining the performance of indoor TV receiving antennas.

R4WG5-ANSI/CTA-2032-C, Indoor TV Receiving Antennas Performance Standard
2021-05-052022-03-21Voting
100%
page=projects&type=project

R4WG7 - CTA-861.6, Improvements on Audio and Video Signaling (working title)

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG07 DTV Interfaces
  • Contributions: 75
  • Last Updated: 2022-03-14 11:53 AM
  • Latest Contribution: 2022-01-31 7:47 AM

This document will include improvements to CTA-861-H, to include improvements on audio and video signaling. (working scope)

R4WG7 - CTA-861.6, Improvements on Audio and Video Signaling (working title)
2021-01-282022-02-25Published
100%
page=projects&type=project

R4WG7 - CTA861-I, A DTV Profile for Uncompressed High Speed Digital Interfaces

  • Progress Report: 1/20/2023: Ballot issued
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG07 DTV Interfaces
  • Contributions: 37
  • Last Updated: 2023-03-20 1:33 PM
  • Latest Contribution: 2023-03-20 2:48 PM

Integration of Amendment 861.6, addressing deferred comments and improving /extending interoperability.

R4WG7 - CTA861-I, A DTV Profile for Uncompressed High Speed Digital Interfaces
2022-06-062023-02-27Published
100%
page=projects&type=project

R4WG7 -- ANSI/CTA-861-H -- A DTV Profile for Uncompressed High Speed Digital Interfaces

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG07 DTV Interfaces
  • Contributions: 50
  • Last Updated: 2021-01-04 7:23 AM
  • Latest Contribution: 2021-01-05 6:41 AM

Produce a new revision of CTA-861, called CTA-861-H, A DTV Profile for Uncompressed High Speed Digital Interfaces , limited to clarification, corrections, and improving and extending interoperability and integration of existing amendments, extensions and errata, including CTA-861.4 (Dynamic HDR Metadata Signaling) and CTA-861.5 (Audio).

R4WG7 -- ANSI/CTA-861-H -- A DTV Profile for Uncompressed High Speed Digital Interfaces
2019-05-302020-12-28Published
100%
page=projects&type=project

R4WG7 -- CTA-861-I Errata -- A DTV Profile for Uncompressed High Speed Digital Interfaces

  • Progress Report: 3/20/2023: project approved and initiated.
  • Project Contact: Alexis Shoemaker
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG07 DTV Interfaces
  • Contributions: 3
  • Last Updated: 2023-03-20 1:45 PM
  • Latest Contribution: 2023-03-20 2:48 PM

This project is to create an Erratum for CTA-861-I that addresses a correction in Section S.3 "distribution_index". The correction updates the range from 0-99 to 0-100.

R4WG7 -- CTA-861-I Errata -- A DTV Profile for Uncompressed High Speed Digital Interfaces
2023-03-202023-04-20*Draft in Development
0%
page=projects&type=project

R4WG7 -- CTA-861.4 Extension -- Updates to Dynamic HDR Metadata Signaling

  • Progress Report: PVC started 7/26 and closes 8/10. Ballot started 8/27 and closes 9/26 Recirculation ballot started 12/19 and closes 1/4/19.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 WG07 DTV Interfaces, R04 Video Systems Committee
  • Contributions: 24
  • Last Updated: 2020-08-24 9:34 AM
  • Latest Contribution: 2020-04-09 12:04 PM

Extension to CTA-861-G that provides updates to Dynamic HDR Metadata Signaling.

R4WG7 -- CTA-861.4 Extension -- Updates to Dynamic HDR Metadata Signaling
2017-07-272019-03-25Published
100%
page=projects&type=project

R4WG8 - ANSI/CTA-2075.1, Loudness Standard for Over-the-Top Television and Online Video Distribution for Mobile and Fixed Devices – LM1

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG08 Audio Loudness Work Group
  • Contributions: 43
  • Last Updated: 2022-09-16 6:20 AM
  • Latest Contribution: 2022-07-18 6:59 AM
R4WG8 - ANSI/CTA-2075.1, Loudness Standard for Over-the-Top Television and Online Video Distribution for Mobile and Fixed Devices – LM1
2021-07-212022-06-16Published
100%
page=projects&type=project

R4WG8 -- CEA-CEB11-B, NTSC/ATSC Loudness Matching

  • Progress Report: Email Ballot closes 9/5/14.
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG08 Audio Loudness Work Group
  • Contributions: 14
  • Last Updated: 2014-09-10 8:54 AM
  • Latest Contribution: 2014-11-24 1:35 PM

This bulletin provides guidance on maintaining uniform audio program loudness between various combinations of analog sources, NTSC services, and digitally delivered terrestrial DTV, satellite and / or cable services while preserving the dynamic range delivery capability of the DTV service.

R4WG8 -- CEA-CEB11-B, NTSC/ATSC Loudness Matching
2013-08-152014-09-10Published
100%
page=projects&type=project

R4WG8 -- CEA-CEB11-C, NTSC/ATSC Loudness Matching

  • Progress Report: Email Ballot issued, closes on Wed. 12/24 at midnight.
  • Project Contact: Mark Levine
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG08 Audio Loudness Work Group
  • Contributions: 8
  • Last Updated: 2017-01-26 2:14 PM
  • Latest Contribution: 2020-08-05 5:24 PM

This bulletin provides guidance on maintaining uniform audio program loudness between various combinations of analog sources, NTSC services, and digitally delivered terrestrial DTV, satellite and / or cable services while preserving the dynamic range delivery capability of the DTV service.

R4WG8 -- CEA-CEB11-C, NTSC/ATSC Loudness Matching
2014-11-242017-01-26Published
100%
page=projects&type=project

R4WG8 -- CTA-2075 Loudness Standard for Over the Top Television (OTT) and Online Video Distribution (OVD) for Mobile and Fixed Devices --

  • Progress Report: Initiated 01/24/2018 CPP 10/18/2019-10/22/2019 - comments addressed. Recirculation ballot closes 1/15/2020. BSR8 closed 1/20/2020. BSR9 submit request sent 1/23/2020.
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 WG08 Audio Loudness Work Group, R04 Video Systems Committee
  • Contributions: 103
  • Last Updated: 2020-08-24 9:56 AM
  • Latest Contribution: 2020-02-18 11:47 AM

Develop a loudness standard for mobile and fixed devices that applies guidelines developed by AES, to consumer technology devices, optimizing the loudness and listener experience for over the top television (OTT) and online video distribution (OVD).

R4WG8 -- CTA-2075 Loudness Standard for Over the Top Television (OTT) and Online Video Distribution (OVD) for Mobile and Fixed Devices --
2018-01-242019-12-31Published
100%
page=projects&type=project

R4WG8 -- CTA-CEB11-D, NTSC/ATSC Loudness Matching

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R04 Video Systems Committee, R04 WG08 Audio Loudness Work Group
  • Contributions: 6
  • Last Updated: 2021-01-12 10:13 AM
  • Latest Contribution: 2020-12-01 2:03 PM

This bulletin provides guidance on maintaining uniform audio program loudness between various combinations of analog sources, NTSC services, and digitally delivered terrestrial DTV, satellite and / or cable services while preserving the dynamic range delivery capability of the DTV service.

R4WG8 -- CTA-CEB11-D, NTSC/ATSC Loudness Matching
2020-08-052021-01-08Published
100%
page=projects&type=project

R6 - ANSI/CTA-2003-C R-2019, Digital Audiobook File Format and Player Requirements

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 25
  • Last Updated: 2019-01-22 11:32 AM
  • Latest Contribution: 2019-05-22 2:13 PM

CTA-2003-C defines requirements and provides recommendations to publishers, software developers, content providers and hardware manufacturers for the data structure, usability requirements, playback systems and delivery systems for audiobooks in digital file format. It should be noted that throughout CTA-2003-C, the term audiobook is defined as any audio file or collection of audio files of primarily spoken word content that is played in a linear order. Therefore, spoken word audio with occasi

R6 - ANSI/CTA-2003-C R-2019, Digital Audiobook File Format and Player Requirements
2018-05-032019-01-15Published
100%
page=projects&type=project

R6 - ANSI/CTA-2017.1 R-2019, Serial Communication Protocol for Portable Electronic Devices

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 23
  • Last Updated: 2019-01-22 11:31 AM
  • Latest Contribution: 2019-01-18 10:35 AM

This document describes a serial communication protocol that enables command and control communication between portable electronic devices and accessories attached to those devices. This protocol builds upon functions provided by the MOST network developed by the MOST Cooperation. MOST is a registered trademark of the MOST Cooperation.

R6 - ANSI/CTA-2017.1 R-2019, Serial Communication Protocol for Portable Electronic Devices
2018-05-032019-01-15Published
100%
page=projects&type=project

R6 - CTA-2009-B R-2021, Performance Specification for Public Alert Receivers

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 4
  • Last Updated: 2022-02-10 6:41 AM
  • Latest Contribution: 2021-04-09 8:31 AM
R6 - CTA-2009-B R-2021, Performance Specification for Public Alert Receivers
2021-02-052021-05-05Published
100%
page=projects&type=project

R6 - CTA-2042.1-C, Wireless Power Glossary Terms

  • Progress Report: Ballot successfully passed.
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 16
  • Last Updated: 2020-11-03 6:25 AM
  • Latest Contribution: 2020-09-28 12:36 PM
R6 - CTA-2042.1-C, Wireless Power Glossary Terms
2020-01-292020-10-06Published
100%
page=projects&type=project

R6 -- CEA-2003-C R-2013 -- Digital Audiobook File Format and Player Requirements

  • Progress Report: Published
  • Project Contact: Alayne Bell
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 31
  • Last Updated: 2013-12-23 12:29 PM
  • Latest Contribution: 2019-01-18 6:36 AM

CEA-2003-C defines requirements and provides recommendations to publishers, software developers, content providers, and hardware manufacturers for the data structure, usability requirements, playback systems and delivery systems for audiobooks in digital file format. Throughout CEA-2003-C, the term audiobook is defined as any audio file or collection of audio files of primarily spoken word content that is played in a linear order.

R6 -- CEA-2003-C R-2013 -- Digital Audiobook File Format and Player Requirements
2011-05-242012-11-28Published
100%
page=projects&type=project

R6 -- CEA-2015 R-2011 -- Mobile Electronics Cabling Standard

  • Progress Report: Cancelled
  • Project Contact: Alayne Bell
  • Contributing Groups: R06 Intelligent Mobility Committee
  • Contributions: 18
  • Last Updated: 2013-09-27 12:48 PM
  • Latest Contribution: 2015-01-19 12:51 PM

This standard defines size and performance requirements for power and speaker cabling used in mobile electronics applications.

R6 -- CEA-2015 R-2011 -- Mobile Electronics Cabling Standard
2011-05-242012-10-18Cancelled
100%
page=projects&type=project

R6 -- CEA-2017.1 R-2013 -- Serial Communication Protocol for Portable Electronic Devices

  • Progress Report: Approved by ANSI on 8/9/13 Published as ANSI Standards on 9/3/13
  • Project Contact: Alayne Bell
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 35
  • Last Updated: 2013-09-03 1:40 PM
  • Latest Contribution: 2015-08-13 5:27 AM

This document describes a serial communication protocol that enables command and control communication between portable electronic devices and accessories attached to those devices. This protocol builds upon functions provided by the MOST network developed by the MOST Cooperation (www.mostcooperation.com).

R6 -- CEA-2017.1 R-2013 -- Serial Communication Protocol for Portable Electronic Devices
2011-05-242013-08-09Published
100%
page=projects&type=project

R6 -- CEA-885 R-2013 -- Remote Starter Safety

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 28
  • Last Updated: 2016-02-22 12:45 PM
  • Latest Contribution: 2019-12-16 11:19 AM

This standard addresses the automotive accessories that allow the operator to start a vehicle while away from the vehicle, and the safety of such devices when installed.

Remote starters that are designed for installation in manual transmission vehicles are not compliant with this standard, and shall not be labeled or promoted as such.

R6 -- CEA-885 R-2013 -- Remote Starter Safety
2011-05-242013-02-08Published
100%
page=projects&type=project

R6 WG28 - CTA-CEB37, Recommended Practice for Proper Use of the OBD-II Port

  • Progress Report: Published 12 March 2020.
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee
  • Contributions: 18
  • Last Updated: 2020-03-12 5:58 AM
  • Latest Contribution: 2019-12-11 11:55 AM
R6 WG28 - CTA-CEB37, Recommended Practice for Proper Use of the OBD-II Port
2019-03-042020-03-12Published
100%
page=projects&type=project

R6 – CTA-885 S-20XX, Remote Starter Safety

  • Progress Report: Withdrawing this project and initiating a new one to withdraw CTA-885 as an ANS and stabilize as a CTA standard. (2019-10-22)
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 12
  • Last Updated: 2019-10-28 6:44 AM
  • Latest Contribution: 2019-12-16 11:03 AM
R6 – CTA-885 S-20XX, Remote Starter Safety
2019-06-052019-08-28Withdrawn
100%
page=projects&type=project

R6 – CTA-885, Remote Starter Safety

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee
  • Contributions: 2
  • Last Updated: 2021-01-04 10:14 AM
  • Latest Contribution: 2019-11-07 11:46 AM
R6 – CTA-885, Remote Starter Safety
2019-10-282019-12-20Published
100%
page=projects&type=project

R6.4 WG1 - ANS/CTA/NSF-2052.2 - Methodology of Measurements for Features in Sleep Tracking Consumer Technology Devices and Applications

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R11 WG01 Sleep Monitors, R11 Health Fitness & Wellness Committee, CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 156
  • Last Updated: 2017-09-25 3:01 PM
  • Latest Contribution: 2019-05-23 11:23 AM

This voluntary standard defines the methodology of measuring elemental and derived parameters used in consumer technology devices and applications that evaluate sleep. The elemental and derived measures covered within this standard are contained within ANSI/CTA-2052.1, Definitions and Characteristics for Wearable Sleep Monitors.

R6.4 WG1 - ANS/CTA/NSF-2052.2 - Methodology of Measurements for Features in Sleep Tracking Consumer Technology Devices and Applications
2014-05-232017-09-05Published
100%
page=projects&type=project

R6.4WG1- CTA-2052.1 - Glossary of Terms for Sleep Wearable Devices

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R11 Health Fitness & Wellness Committee, R11 WG01 Sleep Monitors, CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 139
  • Last Updated: 2016-10-10 11:53 AM
  • Latest Contribution: 2016-09-30 2:22 AM

This standard specifies terms and definitions for sleep wearable devices.

R6.4WG1- CTA-2052.1 - Glossary of Terms for Sleep Wearable Devices
2014-09-042016-09-26Published
100%
page=projects&type=project

R6SC3WG1 -- ANSI/CTA-2042.1-B -- Wireless Power Glossary of Terms

  • Progress Report: New
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff
  • Contributions: 18
  • Last Updated: 2019-02-21 10:46 AM
  • Latest Contribution: 2015-11-02 1:35 PM

This document specifies terms and definitions for wireless power.

R6SC3WG1 -- ANSI/CTA-2042.1-B -- Wireless Power Glossary of Terms
2015-02-032015-08-25Published
100%
page=projects&type=project

R6SC3WG1 -- CEA-2042.1 -- Wireless Power Glossary of Terms

  • Progress Report: ANSI/CEA-2042.1 was published in February 2012 with a January 2012 publication date.
  • Project Contact: Dave Wilson
  • Contributing Groups: R06 Intelligent Mobility Committee
  • Contributions: 23
  • Last Updated: 2012-03-03 6:19 AM
  • Latest Contribution: 2014-04-21 12:47 PM

This document specifies terms and definitions for wireless power.

R6SC3WG1 -- CEA-2042.1 -- Wireless Power Glossary of Terms
2011-02-092012-02-22Published
100%
page=projects&type=project

R6SC3WG1 -- CEA-2042.1-A -- Wireless Power Glossary of Terms

  • Progress Report: New
  • Project Contact: Alayne Bell
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 32
  • Last Updated: 2013-06-14 10:49 AM
  • Latest Contribution: 2015-06-30 9:08 AM

This document specifies terms and definitions for wireless power.

R6SC3WG1 -- CEA-2042.1-A -- Wireless Power Glossary of Terms
2012-01-192013-06-14Published
100%
page=projects&type=project

R6SC3WG2 - CEA-TR-2-A - RF Exposure Regulations and Applicability to Inductive Wireless Power Systems

  • Progress Report: New
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 9
  • Last Updated: 2015-08-14 9:05 AM
  • Latest Contribution: 2015-06-30 10:01 AM

This brochure describes the RF exposure regulations that are designed to protect the public and the limits that govern the use of devices and systems utilizing Radio Frequency energy such as wireless power systems. The brochure is written for the consumers of electronic devices with limited knowledge of technical and engineering matters.

R6SC3WG2 - CEA-TR-2-A - RF Exposure Regulations and Applicability to Inductive Wireless Power Systems
2014-07-172015-08-14Published
100%
page=projects&type=project

R6SC3WG2 -- CEA-TR-7 -- Survey of International Energy Efficiency Regulations for Wireless Power Charging Systems

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff
  • Contributions: 17
  • Last Updated: 2016-02-22 1:00 PM
  • Latest Contribution: 2016-02-02 3:04 PM

This technical report provides a selected countries survey of statues and/or administrative codes, both existing and pending, concerning laws requiring consumer electronic products to be made in conformity with some type of applicable energy efficiency and/or energy consumption regulation.

R6SC3WG2 -- CEA-TR-7 -- Survey of International Energy Efficiency Regulations for Wireless Power Charging Systems
2014-09-052014-12-31*Draft in Development
0%
page=projects&type=project

R6SC3WG2 -- CEA-TR-8 -- Survey of Regulations of Wireless Power Charging Systems

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff
  • Contributions: 18
  • Last Updated: 2016-02-22 1:01 PM
  • Latest Contribution: 2016-02-02 3:04 PM

This technical report provides a survey of regulations, statutes and/or administrative codes, both existing and pending, concerning laws related to wireless power charging systems. Specifically, the survey will identify regulation of certain attributes of wireless chargers across select countries. The wireless power charging attributes to be covered include, but are not limited to frequency, TX power, OOBE limits, EMC aspects, labeling requirements, manual text requirements, etc.

R6SC3WG2 -- CEA-TR-8 -- Survey of Regulations of Wireless Power Charging Systems
2014-09-052014-12-31*Draft in Development
0%
page=projects&type=project

R6SC3WG2 -- TR-2 -- CEA White Paper on RF Exposure Regulations and Applicability to Inductive Wireless Power Systems

  • Progress Report: New
  • Project Contact: Alayne Bell
  • Contributing Groups: CTA Staff
  • Contributions: 38
  • Last Updated: 2013-02-15 11:44 AM
  • Latest Contribution: 2014-05-18 11:50 AM

This brochure informs and educates on the existing regulations and safeguards that protect the public while using devices and systems utilizing Radio Frequency (RF) energy such as wireless power systems.

R6SC3WG2 -- TR-2 -- CEA White Paper on RF Exposure Regulations and Applicability to Inductive Wireless Power Systems
2012-10-182013-02-08Published
100%
page=projects&type=project

R6SC4WG2 -- ANSI/CTA-2056 -- Physical Activity Monitoring for Fitness Wearables Step Counting

  • Progress Report: New - First meeting scheduled for 2 PM, October 29, 2015.
  • Project Contact: Kerri Haresign
  • Contributing Groups: R11 Health Fitness & Wellness Committee, R11 WG02 Physical Activity Monitoring Standards, CTA Staff
  • Contributions: 113
  • Last Updated: 2016-10-11 11:44 AM
  • Latest Contribution: 2019-12-02 10:14 AM

R6.4 WG2 will create definitions and performance standards for physical activity monitoring devices.

R6SC4WG2 -- ANSI/CTA-2056 -- Physical Activity Monitoring for Fitness Wearables Step Counting
2015-09-162016-10-11Published
100%
page=projects&type=project

R6WG14 -- ANSI/CTA-2015 R2017 -- Mobile Electronics Cabling Standard

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff, R03 WG02 In-Vehicle Amplifier Power
  • Contributions: 80
  • Last Updated: 2022-07-21 1:12 PM
  • Latest Contribution: 2022-07-21 1:12 PM

This standard defines size and performance requirements for power and speaker cabling used in mobile electronics applications.

R6WG14 -- ANSI/CTA-2015 R2017 -- Mobile Electronics Cabling Standard
2012-10-182017-01-30Published
100%
page=projects&type=project

R6WG16 -- CEA-CEB25 -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics Devices

  • Progress Report: CEA-CEB25 was published in October 2011.
  • Project Contact: Dave Wilson
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 47
  • Last Updated: 2014-06-12 11:11 AM
  • Latest Contribution: 2015-03-20 2:22 PM

To develop technical documents related to allowing compatible Common Alert Protocol (CAP) usage among various consumer electronics devices that process CAP-encoded data, independent of delivery method. Such documents may include guidelines for filtering and device response.

R6WG16 -- CEA-CEB25 -- Best Practices for Implementing Common Alerting Protocol (CAP) Alerts for Consumer Electronics Devices
2009-10-272011-10-18Published
100%
page=projects&type=project

R6WG17 --CEA-2046 -- Headset Cable Compatibility

  • Progress Report: R6 voted to cancel this project at the 7/21/14 meeting.
  • Project Contact: Alayne Bell
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 45
  • Last Updated: 2014-08-26 12:40 PM
  • Latest Contribution: 2014-11-04 9:30 PM

A standard that will define wired headphone, microphone, control signal and antenna compatibility across multiple portable and handheld devices..

R6WG17 --CEA-2046 -- Headset Cable Compatibility
2012-10-182013-10-18*Cancelled
0%
page=projects&type=project

R6WG18 -- CEA-CEB30 -- Guidelines for Reducing Visual-Manual Driver Distraction during Interactions with Portable or Handheld Electronic Devices

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 25
  • Last Updated: 2019-02-08 10:04 AM
  • Latest Contribution: 2014-11-04 9:30 PM
R6WG18 -- CEA-CEB30 -- Guidelines for Reducing Visual-Manual Driver Distraction during Interactions with Portable or Handheld Electronic Devices
2013-10-232019-02-08Published
100%
page=projects&type=project

R6WG18 -- CEA-TR-6 - Keeping Your Eyes on the Road: What the CE Industry is Doing to Help You Drive Safely

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 10
  • Last Updated: 2016-02-22 12:56 PM
  • Latest Contribution: 2015-02-12 10:41 AM

A catalog documenting the products and services offered by the consumer electronics industry in 2014 that help drivers operate vehicles safely.

R6WG18 -- CEA-TR-6 - Keeping Your Eyes on the Road: What the CE Industry is Doing to Help You Drive Safely
2014-07-212014-12-31Published
100%
page=projects&type=project

R6WG22 -- CTA-2042.3 -- Methods of Measurement for Efficiency and Standby Power of Wireless Power Systems

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 344
  • Last Updated: 2018-02-08 5:01 PM
  • Latest Contribution: 2019-05-30 11:05 AM

The scope of this document is to establish common test methodology for power transfer efficiency and standby power for consumer electronic devices that utilize wireless power transfer.

R6WG22 -- CTA-2042.3 -- Methods of Measurement for Efficiency and Standby Power of Wireless Power Systems
2011-02-092018-02-08Approved
100%
page=projects&type=project

R6WG22 -- CTA-2042.5 -- System Requirements for Tightly-Coupled Wireless Power Transfer

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 193
  • Last Updated: 2018-05-13 11:22 AM
  • Latest Contribution: 2018-06-18 10:23 AM

This standard defines a tightly coupled wireless power system.

R6WG22 -- CTA-2042.5 -- System Requirements for Tightly-Coupled Wireless Power Transfer
2011-10-242012-10-24*Withdrawn
0%
page=projects&type=project

R6WG23 - ANSI/CTA-2067 - Small Unmanned Aerial Systems – Remote Identification

  • Progress Report: R6 canceled this project on 10/4/18.
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 83
  • Last Updated: 2018-10-09 7:33 AM
  • Latest Contribution: 2019-05-30 11:05 AM

To develop a standard for identifying small unmanned aerial systems with a Remote ID during flight to advance accountability and transparency.

R6WG23 - ANSI/CTA-2067 - Small Unmanned Aerial Systems – Remote Identification
2017-03-022018-12-31*Cancelled
0%
page=projects&type=project

R6WG23 – ANSI/CTA-2063 – Small Unmanned Aerial Systems Serial Numbers

  • Progress Report: New
  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 88
  • Last Updated: 2017-04-22 8:22 AM
  • Latest Contribution: 2020-04-08 12:09 PM

To develop a standard for serial numbers to be used by small unmanned aerial systems.

R6WG23 – ANSI/CTA-2063 – Small Unmanned Aerial Systems Serial Numbers
2016-04-072017-04-21Approved
100%
page=projects&type=project

R6WG23 – ANSI/CTA-2063-A – Small Unmanned Aerial Systems Serial Numbers

  • Progress Report: Submit BSR-8
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 46
  • Last Updated: 2019-09-16 11:11 AM
  • Latest Contribution: 2020-04-08 11:50 AM

Revision of ANSI/CTA-2063, Small Unmanned Aerial Systems Serial Numbers, to facilitate adoption by international UAS authorities.

R6WG23 – ANSI/CTA-2063-A – Small Unmanned Aerial Systems Serial Numbers
2018-10-042019-09-12Published
100%
page=projects&type=project

R6WG24 - CTA-2069, Definitions and Characteristics of Augmented and Virtual Reality Technologies

  • Project Contact: Kerri Haresign
  • Contributing Groups: CTA Staff, R12 XR Committee
  • Contributions: 85
  • Last Updated: 2019-04-01 8:53 AM
  • Latest Contribution: 2019-04-01 8:53 AM

This document will define terms related to Augmented and Virtual Reality Technologies. Where appropriate, the document will provide both consumer messaging and industry definition for the terms.

R6WG24 - CTA-2069, Definitions and Characteristics of Augmented and Virtual Reality Technologies
2017-03-282018-05-07Approved
100%
page=projects&type=project

R6WG25 - CTA-2076, Inclusive, Audio-based, Network Navigation Systems for All Persons including those Blind/Low Vision

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee, R06 WG25 Inclusive Audio-Based Network Navigation Systems Design
  • Contributions: 132
  • Last Updated: 2019-05-31 5:55 AM
  • Latest Contribution: 2020-04-09 11:36 AM

This standard specifies requirements for the design of inclusive audio-based network navigation systems (IABNNS), which are technologies used to augment the physical environment by delivering sufficient audio, haptic, visual instructions or instructions in other formats as may be required. This standard helps design professionals achieve an inclusive environment through IABNNSs that augment the physical environment by the provision of aural information about environments for users.

R6WG25 - CTA-2076, Inclusive, Audio-based, Network Navigation Systems for All Persons including those Blind/Low Vision
2017-12-202019-05-31Approved
100%
page=projects&type=project

R6WG25 - CTA-2076.1, Indoor Network Navigation Systems for Intellectual and Developmental Disabilities

  • Project Contact: Alexandra Blasgen
  • Contributing Groups: R06 Intelligent Mobility Committee, R06 WG25 Inclusive Audio-Based Network Navigation Systems Design, CTA Staff
  • Contributions: 27
  • Last Updated: 2020-12-10 7:39 AM
  • Latest Contribution: 2021-01-04 9:21 AM
R6WG25 - CTA-2076.1, Indoor Network Navigation Systems for Intellectual and Developmental Disabilities
2020-01-292020-12-10Published
100%
page=projects&type=project

R6WG25 - CTA-2076.2, Indoor Network Navigation Systems for People who are Deaf, Hard of Hearing, and DeafBlind

  • Progress Report: New
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee, R06 WG25 Inclusive Audio-Based Network Navigation Systems Design
  • Contributions: 3
  • Last Updated: 2023-03-21 11:13 AM
  • Latest Contribution: 2021-06-02 1:32 PM
R6WG25 - CTA-2076.2, Indoor Network Navigation Systems for People who are Deaf, Hard of Hearing, and DeafBlind
2021-05-052023-12-31*Draft in Development
0%
page=projects&type=project

R6WG26 - CTA-2077, Recommendations for Portable Power Charging Markings

  • Progress Report: Ballot opened 10/22/19.
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee
  • Contributions: 70
  • Last Updated: 2020-02-28 12:04 PM
  • Latest Contribution: 2020-03-12 6:49 AM

This document establishes a common terminology and overall grading system/evaluation criteria that addresses portable power packs.

R6WG26 - CTA-2077, Recommendations for Portable Power Charging Markings
2017-12-202019-11-22Published
100%
page=projects&type=project

R6WG29 - CTA-2009-C, Performance Specification for Public Alert Receivers

  • Progress Report: New
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee, R06 WG29 Public Alert Receivers
  • Contributions: 5
  • Last Updated: 2023-01-24 7:49 AM
  • Latest Contribution: 2022-12-01 10:58 AM
R6WG29 - CTA-2009-C, Performance Specification for Public Alert Receivers
2021-05-052023-02-28*Draft in Development
70%
page=projects&type=project

R6WG8 - CTA-803-C, Mobile Electronics Wiring Designations for Audio and Vehicle Security/Convenience

  • Progress Report: 08/30/22 - Draft sent for ballot. 9/29/22 - Ballot successfully closed with approval. Waiting on ANSI final approval prior to publication. 11/3/22 - Final approval received. Published.
  • Project Contact: Alexandra Blasgen
  • Contributing Groups: CTA Staff, R06 Intelligent Mobility Committee, R06 WG08 Mobile Electronics Wiring Designation
  • Contributions: 15
  • Last Updated: 2022-11-03 2:17 PM
  • Latest Contribution: 2022-11-11 10:23 AM
R6WG8 - CTA-803-C, Mobile Electronics Wiring Designations for Audio and Vehicle Security/Convenience
2022-02-082022-11-03Published
100%
page=projects&type=project

R6WG8 -- CEA-803-B -- Mobile Electronics Wiring Designations for Audio, and Vehicle Security/Convenience

  • Progress Report: Approved.
  • Project Contact: Kerri Haresign
  • Contributing Groups: R06 Intelligent Mobility Committee, CTA Staff
  • Contributions: 31
  • Last Updated: 2016-02-22 12:58 PM
  • Latest Contribution: 2019-02-08 1:13 PM

This standard defines the terms, abbreviations, and definitions used in the sales and installation of vehicle aftermarket audio and security equipment. The standard adds continuity to mobile electronics installation information, enables easier data collection, and ensures consistency of information to installers.

CEA-803-A does not address home theater applications. See ANSI/CEA-863-B.

R6WG8 -- CEA-803-B -- Mobile Electronics Wiring Designations for Audio, and Vehicle Security/Convenience
2011-01-262012-11-05Published
100%
page=projects&type=project

R7 - ANSI/CTA-709.1-D R-2019 - Control Network Protocol Specification

  • Progress Report: New 2/5/19 R7 initiated project. CPP 3/15-29/19. Ballot issued 4/8/19; closed 5/6/19. Extended ballot closed 7/30/19. 9/3/19 sent request to submit BSR9.
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R07 Consumer Electronics Networking Committee, R07 WG13 Home Control Systems Working Group
  • Contributions: 29
  • Last Updated: 2020-08-27 10:09 AM
  • Latest Contribution: 2020-01-30 7:21 AM

This specification applies to a communication protocol for networked control systems. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and primary-secondary control strategies.

R7 - ANSI/CTA-709.1-D R-2019 - Control Network Protocol Specification
2019-02-052019-09-19Published
100%
page=projects&type=project

R7 - ANSI/CTA-852-C R-2019 - Tunneling Device Area Network Protocols Over Internet Protocol Channels

  • Progress Report: 2/5/19 R7 initiated; CPP 3/15 - 29/19; Ballot issued 4/8/19 - 5/6/19; Extended ballot closed 7/30/19. Checked files but no IP.
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R07 Consumer Electronics Networking Committee, R07 WG13 Home Control Systems Working Group
  • Contributions: 26
  • Last Updated: 2020-08-27 10:07 AM
  • Latest Contribution: 2019-12-04 12:34 PM

ANSI/CTA-852-C specifies a communications method that allows networked data acquisition and control devices to communicate with each other over the internet. The purpose of such devices are widely varying and include functions such as appliance monitoring, meter reading, and HVAC and lighting control to name a few. ANSI/CTA-852-C does not replace existing device communications protocols, but instead allows those protocols to use the internet as a communications medium.

R7 - ANSI/CTA-852-C R-2019 - Tunneling Device Area Network Protocols Over Internet Protocol Channels
2019-02-052019-12-04Published
100%
page=projects&type=project

R7 - ANSI/CTA-852.1-A R-2019 - Enhanced Protocol for Tunneling Component Network Protocols over Internet Protocol Channels

  • Progress Report: New 2/5/2019 R7 initiated. CPP 3/15 - 29/19. Ballot 4/8/19 - 5/6/19. Extended ballot closed 7/30/19. Sent request to submit BSR9.
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R07 Consumer Electronics Networking Committee, R07 WG13 Home Control Systems Working Group
  • Contributions: 22
  • Last Updated: 2020-08-27 10:07 AM
  • Latest Contribution: 2020-02-13 7:12 AM

The ANSI/CTA-852.1-A standard specifies a communications method that allows networked data acquisition and control devices to communicate with each other over the internet. The purpose of such devices are widely varying and include functions such as appliance monitoring, meter reading, and HVAC and lighting control to name a few.

R7 - ANSI/CTA-852.1-A R-2019 - Enhanced Protocol for Tunneling Component Network Protocols over Internet Protocol Channels
2019-02-052019-11-07Published
100%
page=projects&type=project

R7 - CTA-2002-A R-2019 - Test Procedure for Powerline Carrier Technology

  • Progress Report: Initiated on 10/2/18. CPP 2/24/19 - 3/11/19. Ballot 3/18/19-4/14/19.
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R07 Consumer Electronics Networking Committee
  • Contributions: 16
  • Last Updated: 2020-08-26 12:50 PM
  • Latest Contribution: 2019-05-31 7:32 AM

This test procedure establishes a set of tests and analysis that will validate key aspects of Powerline Carrier Technology (PLT) for use in Home Networking products.

R7 - CTA-2002-A R-2019 - Test Procedure for Powerline Carrier Technology
2018-10-022019-05-29Published
100%
page=projects&type=project

R7 - CTA-TR-12 (Withdraw) - Securing Connected Devices for Consumers in the Home

  • Progress Report: New 9/26/19 - R7 initiated project to withdraw. CPP issued 12/2/19; Closed 12/16/19. Ballot issued 2/3/20; Closed 3/2/20.
  • Project Contact: Veronica Lancaster
  • Contributing Groups: CTA Staff, R07 Consumer Electronics Networking Committee
  • Contributions: 6
  • Last Updated: 2020-08-21 10:50 AM
  • Latest Contribution: 2020-03-16 9:08 AM

This paper addresses security concerns related to the connected devices for consumers in the home. Many of these devices fall into what is being referred to as the smart home or the Internet of Things (IoT). There is a general lack of consensus on the definition of the IoT. For the purpose of this paper we will be addressing the collection of uniquely identifiable, accessible and consumer oriented Internet-connected electronic devices and the services that drive their functionality.

R7 - CTA-TR-12 (Withdraw) - Securing Connected Devices for Consumers in the Home
2019-09-262020-03-16Withdrawn
100%

* Estimated completion date