ProjectView
All Projects
showing 101–200 of 371 projects | page « 1 2 3 4 »
Name![]() | Start Date | Completion Date | State | % Complete |
---|---|---|---|---|
page=projects&type=projects | ||||
page=projects&type=project | ||||
R3WG2 -- ANSI/CTA-2006-C -- Testing and Measurement Methods for In-Vehicle Audio Amplifiers
This standard defines characteristics that, considered collectively, describe the performance of power amplifiers designed for In-Vehicle applications. R3WG2 -- ANSI/CTA-2006-C -- Testing and Measurement Methods for In-Vehicle Audio Amplifiers (Inactive) | 2019-01-24 | 2019-12-16 | Published | 100% |
page=projects&type=project | ||||
R3WG2-ANSI/CTA-2006-D, Testing and Measurement Methods for In-Vehicle Audio Amplifiers
This document defines characteristics that, considered collectively, describe the performance of Power Amplifiers designed for In-Vehicle applications. R3WG2-ANSI/CTA-2006-D, Testing and Measurement Methods for In-Vehicle Audio Amplifiers (Inactive) | 2021-05-03 | 2022-07-11 | Published | 100% |
page=projects&type=project | ||||
R3WG3 - CTA-2084 - Test Methods for Determining A/V Products Energy Efficiency
CTA-2084 defines methods for measuring Audio Video (A/V) products’ energy efficiency and related items. R3WG3 - CTA-2084 - Test Methods for Determining A/V Products Energy Efficiency (Inactive) | 2018-10-02 | 2021-08-31 | Published | 100% |
page=projects&type=project | ||||
R3WG3 - CTA-2084-A - Test Methods for Determining A/V Products Energy Efficiency
CTA-2084-A defines methods for measuring Audio Video (A/V) products’ energy efficiency and related items. R3WG3 - CTA-2084-A - Test Methods for Determining A/V Products Energy Efficiency (Inactive) | 2020-10-09 | 2021-06-22 | Published | 100% |
page=projects&type=project | ||||
R3WG4 - CTA-2100 - Standard Method of Measurement for Soundbars
This standard describes how to combine the output volume, frequency, and directivity response into an overall performance rating for the Soundbar System. | 2020-05-13 | 2022-08-16 | Published | 100% |
page=projects&type=project | ||||
R4 - CTA-2040-A - SD Common Card Interface
CTA-2040 describes interfaces between a Common Interface Module (CI Module) located on a microSD card and a Terminal device. The purpose of this standard is to specify the hardware, signaling, and application interface between a digital consumer electronics device e.g. television receiver (handheld, stationary or otherwise) and a small removable, replaceable CI Module that implements and embodies significant portions of a Conditional Access System (CAS). R4 - CTA-2040-A - SD Common Card Interface (Inactive) | 2018-11-20 | 2018-12-20 | Published | 100% |
page=projects&type=project | ||||
R4 -- ANSI/CTA-708-E S-2023 -- Digital Television (DTV) Closed Captioning
This is a stabilization of ANSI/CTA-708-E R-2018. This standard defines DTV Closed Captioning (DTVCC) and provides specifications and guidelines for caption service providers, distributors of television signals, decoder and encoder manufacturers, DTV receiver manufacturers, and DTV signal processing equipment manufacturers. R4 -- ANSI/CTA-708-E S-2023 -- Digital Television (DTV) Closed Captioning (Inactive) | 2023-02-01 | 2023-03-02* | Voting | 80% |
page=projects&type=project | ||||
R4 -- ANSI/CTA-766-D R-2019 -- U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP)
This standard augments ATSC A/65 [A65] and designates a) the RRT which provides the receiver with the definition of the rating system and b) the Content Advisory Descriptors which provide the receiver with the specific program rating for each program. Specifically, this standard specifies the exact syntax to be used to define the U.S. and Canadian Rating Region Tables (RRT) in accordance with ATSC A/65 [A65] Section 6.4, as well as the exact syntax to be used in the Content Advisory Descriptors. R4 -- ANSI/CTA-766-D R-2019 -- U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP) (Inactive) | 2018-11-20 | 2019-07-17 | Published | 100% |
page=projects&type=project | ||||
R4 -- ANSI/CTA-814-C R-2023/J-STD-42-C -- Emergency Alert Messaging for Cable
This is a reaffirmation of ANSI/CTA-814-C/J-STD-42-C. This standard defines an Emergency Alert signaling method for use by cable TV systems to signal emergencies to digital receiving devices that are offered for retail sale. Such devices include digital set-top boxes that are sold to consumers at retail, digital TV receivers, and digital video recorders. R4 -- ANSI/CTA-814-C R-2023/J-STD-42-C -- Emergency Alert Messaging for Cable (Inactive) | 2023-02-01 | 2023-03-02* | Voting | 80% |
page=projects&type=project | ||||
R4 -- CTA-2053-A Receiver Specifications for ATSC Security
This document is a Standard for receiver certificate handling and processing to meet the security needs for ATSC. R4 -- CTA-2053-A Receiver Specifications for ATSC Security (Inactive) | 2020-05-13 | 2020-08-31* | Withdrawn | 75% |
page=projects&type=project | ||||
R4 -- CTA-2066, Streaming Quality of Experience Events, Properties and Metrics
R4 to develop a standard that specifies a set of metrics, associated terminology and event and attribute access for representing streaming media quality of experience. R4 -- CTA-2066, Streaming Quality of Experience Events, Properties and Metrics (Inactive) | 2017-02-09 | 2020-03-25 | Published | 100% |
page=projects&type=project | ||||
R4 -- CTA-2072 R-2023-- HDR Still Photo Interface
This is a reaffirmation of CTA-2072. The project will develop standards for file formats including physical and electrical to support proper display of HDR still photos, including sequence mode photos, on TVs with HDR support. R4 -- CTA-2072 R-2023-- HDR Still Photo Interface (Inactive) | 2023-02-01 | 2023-03-02* | Voting | 80% |
page=projects&type=project | ||||
R4 -- CTA-542-D S-2023 -- Cable Television Channel Identification Plan
This is a stabilization of CTA-542-D R-2018. This standard designates identification numbers for 6 MHz channel frequency allocations for 158 channels up to 1002 MHz, with a method of specifying higher channel numbers. R4 -- CTA-542-D S-2023 -- Cable Television Channel Identification Plan (Inactive) | 2023-02-01 | 2023-03-02* | Voting | 80% |
page=projects&type=project | ||||
R4 -- Withdrawal of R4WG18 -- CTA-CEB26-B, Mobile/Handheld DTV Implementation Guidelines
This ATSC-M/H device implementation guideline is intended to provide guidance to receiving device designers. This document provides explanations of provisions of the ATSC Standard (A/153) along with recommendations for best practices to assure interoperability across different devices, geographies,service providers, application providers, operators, and networks. R4 -- Withdrawal of R4WG18 -- CTA-CEB26-B, Mobile/Handheld DTV Implementation Guidelines (Inactive) | 2020-03-30 | 2020-06-21 | Approved | 100% |
page=projects&type=project | ||||
R4 WG18 - CTA-CEB32.1-A - Recommended Practice for ATSC 3.0 Television Sets, System Integration
Revise the recommended practice for system integration for ATSC 3.0 Television Sets. R4 WG18 - CTA-CEB32.1-A - Recommended Practice for ATSC 3.0 Television Sets, System Integration (Inactive) | 2022-11-10 | 2023-05-01* | Draft in Development | 0% |
page=projects&type=project | ||||
R4 WG22 - CTA-2010-C - Standard Method of Measurement for Powered Subwoofers
This standard defines a method for measuring the audio performance of subwoofers, both passive and powered. | 2022-05-10 | 2023-03-31* | Draft in Development | 0% |
page=projects&type=project | ||||
R4 WG22 - CTA-2034-B - Standard Method of Measurement for In-Home Loudspeakers
This standard describes how to determine the frequency response, directivity and maximum | 2022-05-10 | 2023-03-31* | Draft in Development | 0% |
page=projects&type=project | ||||
R4 WG22 - CTA-2054 - Specifications for Selecting an Amplifier for Use with a Loudspeaker System
This standard will outline the performance attributes of a power amplifier in order to allow consumers / end-users to easily determine if a given amplifier is compatible with a given loudspeaker system. R4 WG22 - CTA-2054 - Specifications for Selecting an Amplifier for Use with a Loudspeaker System (Inactive) | 2022-05-10 | 2023-05-31* | Draft in Development | 0% |
page=projects&type=project | ||||
R4 WG22 - CTA-2099-A - Standard Method of Measurement for Matching In-Home Amplifiers and Loudspeakers
This standard describes how to determine the maximum output capability of loudspeakers, subwoofers, and amplifiers intended for use in consumer/residential applications. It also describes how to determine the appropriate crossover frequency region for and between loudspeakers and subwoofers. | - | - | Draft in Development | 0% |
page=projects&type=project | ||||
R4SC3 -- ANSI-J-STD-70 (CEA-2035) Emergency Alert Metadata for the Home Network
CEA-2035/DVS-847 standardizes metadata elements describing emergency alert events to devices in a home network, for applications involving the delivery of Commercial Video Services into the home network. Commercial Video Services are sources of audio/video content provided as live or on-demand streams from a particular service provider. Other standards define emergency alert signaling | 2014-09-09 | 2019-05-30 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG1 -- ANSI/CEA-708.1 -- Closed Captioning for 3D Video
This standard describes how to encode closed captioning for 3D video in CEA-708 caption services. R4SC3WG1 -- ANSI/CEA-708.1 -- Closed Captioning for 3D Video (Inactive) | 2011-06-14 | 2012-09-04 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG1 -- ANSI/CTA-708-E R-2018 -- Digital Television (DTV) Closed Captioning
This standard defines DTV Closed Captioning (DTVCC) and provides specifications and guidelines for caption service providers, distributors of television signals, decoder and encoder manufacturers, DTV receiver manufacturers, and DTV signal processing equipment manufacturers. R4SC3WG1 -- ANSI/CTA-708-E R-2018 -- Digital Television (DTV) Closed Captioning (Inactive) | 2018-01-17 | 2018-07-23 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG1 -- ANSI/CTA-708.1 R-2017 -- Closed Captioning for 3D Video
This standard describes how to encode closed captioning for 3D video in CTA-708 caption services. R4SC3WG1 -- ANSI/CTA-708.1 R-2017 -- Closed Captioning for 3D Video (Inactive) | 2016-11-10 | 2017-06-26 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG1 -- CTA-2064, IMSC1 Interoperability
Analyze ATSC CS/343 “Captions and Subtitles” and consider developing standards, bulletins or technical reports. Oversee the development of test files conforming to ATSC CS/343, CS/331 and DASH-IF ATSC Profile including corresponding video and audio content as well as DASH MPD and MMT files. Document discrepancies with decoding and presentation on the DASH-IF reference decoder, DASH.js. R4SC3WG1 -- CTA-2064, IMSC1 Interoperability (Inactive) | 2016-05-19 | 2016-11-10* | Withdrawn | 25% |
page=projects&type=project | ||||
R4SC3WG12 -- CEA-CEB12-B R-2015 -- DTV Recommended Practice for Locating and Navigating among ATSC Television Channels (Including PSIP Recommendations)
This bulletin, CEA-CEB12-B, provides guidance for the development and implementation of Advanced Television Systems Committee (ATSC) Program and System Information Protocol (PSIP)-compliant receivers, cable-ready DTV receivers, personal recorders and other consumer electronics devices. It includes recommendations and suggestions for device functionality. CEA-CEB12-B should in no way prohibit consumer device manufacturers from including additional features, and CEA-CEB12-B should not be interpret R4SC3WG12 -- CEA-CEB12-B R-2015 -- DTV Recommended Practice for Locating and Navigating among ATSC Television Channels (Including PSIP Recommendations) (Inactive) | 2015-06-22 | 2015-08-13 | Approved | 100% |
page=projects&type=project | ||||
R4SC3WG12 -- CEA-CEB21 -- Recommended Practice for Selection and Presentation of DTV Audio
CEA-CEB21 recommends what actions a receiver with a single ATSC audio decoder should take in the presence or absence of AC-3 audio metadata. It includes recommendations and suggestions on how these receiver actions should interact with user selections via different implementation choices. It does not prohibit consumer device manufacturers from including additional features, nor does it recommend an upper limit to device performance. R4SC3WG12 -- CEA-CEB21 -- Recommended Practice for Selection and Presentation of DTV Audio (Inactive) | 2008-10-09 | 2011-06-30 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG12 -- CTA-CEB21-A -- Recommended Practice for Selection and Presentation of DTV Audio
CTA-CEB21-A recommends what actions a receiver with a single ATSC audio decoder should take in the presence or absence of AC-3 audio metadata. It includes recommendations and suggestions on how these receiver actions should interact with user selections via different implementation choices. It does not prohibit consumer device manufacturers from including additional features, nor does it recommend an upper limit to device performance. R4SC3WG12 -- CTA-CEB21-A -- Recommended Practice for Selection and Presentation of DTV Audio (Inactive) | 2015-10-22 | 2016-12-30 | Draft in Development | 100% |
page=projects&type=project | ||||
R4SC3WG13 -- ANSI/CTA-814-C/J-STD-42-C -- Emergency Alert Messaging for Cable
This standard defines an Emergency Alert signaling method for use by cable TV systems to signal emergencies to digital receiving devices that are offered for retail sale. Such devices include digital set-top boxes that are sold to consumers at retail, digital TV receivers, and digital video recorders. R4SC3WG13 -- ANSI/CTA-814-C/J-STD-42-C -- Emergency Alert Messaging for Cable (Inactive) | 2018-02-01 | 2019-01-31 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG15 TR - 3 Technical Report on Closed Captioning in IP-delivered Video Programing
WG15 is to make a recommendation regarding using SMPTE Timed Text as referenced in the FCC regulations. The work is | 2012-05-25 | 2013-01-29 | Pre-Vote Comments | 100% |
page=projects&type=project | ||||
R4SC3WG8 -- ANSI/CEA-2020 R-2014, Other VBI Waveforms
This standard, CEA-2020, specifies four Vertical Blanking Interval (VBI) waveforms in commercial use. The electrical properties of the waveforms are covered, but the meaning of the payload data is not. The waveforms apply to 525-line, interlaced (i.e. 480i) analog television signals. The waveforms may be present on analog inputs and analog outputs, but no conformance requirements about the actual presence of the waveforms are defined in CEA-2020. R4SC3WG8 -- ANSI/CEA-2020 R-2014, Other VBI Waveforms (Inactive) | 2013-02-13 | 2013-12-31 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG8 -- ANSI/CEA-608-E R-2014, Line 21 Data Services
CEA-608-E is a technical standard and guide for using or providing Closed Captioning services or other data services embedded in line 21 of the vertical blanking interval of the NTSC video signal. This includes provision for encoding equipment and/or decoding equipment to produce such material as well as manufacturers of television receivers which are required to include such decoders in their equipment as a matter of regulation (see Annex F). R4SC3WG8 -- ANSI/CEA-608-E R-2014, Line 21 Data Services (Inactive) | 2013-07-08 | 2014-06-02 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG8 -- CEA-516-S-20XX, Joint EIA/CVCC Recommended Practice for Teletext: North American Basic Teletext Specification (NABTS)
This document contains the technical descriptions of the transmission technique, coding language, and user interface for one-way broadcast teletext-service applications in North America. R4SC3WG8 -- CEA-516-S-20XX, Joint EIA/CVCC Recommended Practice for Teletext: North American Basic Teletext Specification (NABTS) (Inactive) | 2013-07-08 | 2013-12-20 | Published | 100% |
page=projects&type=project | ||||
R4SC3WG8 --ANSI/CEA-766-D, U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP)
CEA-766-C augments ATSC A/65C and designates a)the RRT which provides the receiver with the definition of the rating system and b) the Content Advisory Descriptors which provide the receiver with the specific program rating for each program. R4SC3WG8 --ANSI/CEA-766-D, U.S. and Canadian Rating Region Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information Using ATSC Program and System Information Protocol (PSIP) (Inactive) | 2013-07-08 | 2013-09-30 | Published | 100% |
page=projects&type=project | ||||
R4SC8 -- CEA-761-B R-2012 -- DTV Remodulator Specification with Enhanced OSD Capability
CEA-761-B defines minimum specifications for a one-way data path utilizing an 8 VSB trellis or a 16 VSB remodulator in compliance with ATSC Standard A/53, Annex D. It also defines on-screen display (OSD) capabilities. CEA-761-B applies to any type of device used to connect to an ATSC compliant digital television receiver (DTV) receiver. Devices meeting this standard should interoperate with any ATSC compliant receiver that also supports "monitor mode." R4SC8 -- CEA-761-B R-2012 -- DTV Remodulator Specification with Enhanced OSD Capability (Inactive) | 2011-08-02 | 2012-03-30 | Published | 100% |
page=projects&type=project | ||||
R4SC8 -- CEA-799-A R-2012 -- On-Screen Display Specification
CEA-799-A specifies syntax and semantics for bitmapped graphics data typically used for on-screen display (OSD). CEA-799-A is applicable whenever it is necessary to specify a standard method for delivery of bitmapped graphics data. The pixel formats include optional alpha-blend and transparency attributes to support composition of graphics over analog or digitally decoded video within the display. R4SC8 -- CEA-799-A R-2012 -- On-Screen Display Specification (Inactive) | 2011-08-02 | 2012-03-30 | Published | 100% |
page=projects&type=project | ||||
R4SC8 -- CEA-CEB5-B R-2012 -- Recommended Practice for DTV Receiver “Monitor” Mode Capability
CEA-CEB5-B is intended to provide recommendations to digital television (DTV) designers/manufacturers concerning a "monitor" mode capability. See EIA-762 for minimum specifications for a DTV remodulator. R4SC8 -- CEA-CEB5-B R-2012 -- Recommended Practice for DTV Receiver “Monitor” Mode Capability (Inactive) | 2011-08-02 | 2012-03-30 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG11 -- ANSI/CTA-2040-A, SD Common Card Interface Standard
CTA-2040 describes interfaces between a Common Interface Module (CI Module) located on a microSD card and a Terminal device. The purpose of this standard is to specify the hardware, signaling, and application interface between a digital consumer electronics device e.g. television receiver (handheld, stationary or otherwise) and a small removable, replaceable CI Module that implements and embodies significant portions of a Conditional Access System (CAS). R4SC8WG11 -- ANSI/CTA-2040-A, SD Common Card Interface Standard (Inactive) | 2016-01-19 | 2018-12-20 | Cancelled | 100% |
page=projects&type=project | ||||
R4SC8WG11 -- CEA-2053 -- Receiver Specifications Re: ATSC 2.0 Security
R4.8 to create a standard for x.509 certificate handling and processing requests to meet the security needs identified by ATSC in Kavi document #. R4SC8WG11 -- CEA-2053 -- Receiver Specifications Re: ATSC 2.0 Security (Inactive) | 2014-07-01 | 2015-08-25 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- ANSI/CEA-762-B R-2015, DTV Remodulator Specification
This standard defines minimum specifications for a one-way data path utilizing an 8-VSB trellis remodulator in compliance with ATSC A/53, Part 2:2007, ATSC Digital Television Standard Part 2 - RF/Transmission System Characteristics. This standard applies to any type of device used to connect to an ATSC compliant digital television (DTV) receiver. Devices meeting this standard should interoperate with any ATSC compliant receiver that also supports “monitor mode.” R4SC8WG12 -- ANSI/CEA-762-B R-2015, DTV Remodulator Specification (Inactive) | 2013-06-04 | 2015-02-25 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- ANSI/CEA-775-C-R2013 -- DTV 1394 Interface Specification
CEA-775-C defines mechanisms to allow a source of MPEG service, such as a cable or terrestrial set-top | 2012-12-20 | 2013-04-01 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- ANSI/CEA-775.2-A-R-20XX -- Service Selection Information for Digital Storage Media Interoperability
CEA-775-C [1] standardizes the IEEE 1394 [3][4] High Performance Serial Bus interface for the Digital | 2012-12-20 | 2013-06-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CEA-679-C R-2013 -- National Renewable Security Standard
CEA-679-C describes the physical and electrical parameters of the interface for conditional access (CA) devices for consumer electronics (CE). It specifies the interface to a CA device that performs the signal access and, optionally, descrambling and key generation. This interface definition allows the entire CA system to be removable and hence replaceable. Very few constraints, if any, are placed on the CA system architecture. R4SC8WG12 -- CEA-679-C R-2013 -- National Renewable Security Standard (Inactive) | 2010-10-18 | 2013-11-04 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems
The copy protection systems outlined in CEA-796-A all support the copy protection frameworks described in CEA-679-C, Parts A and B. R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems (Inactive) | 2010-10-18 | 2012-11-20 | Voting | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems (CLONE)
The copy protection systems outlined in CEA-796-A all support the copy protection frameworks described in CEA-679-C, Parts A and B. R4SC8WG12 -- CEA-796-A R-2012 -- NRSS Copy Protection Systems (CLONE) (Inactive) | 2010-10-18 | 2012-11-20 | Voting | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CEA-818-E -- Cable Compatibility Requirements
CEA-818-E Part 1 sets forth the requirements that a cable TV system meets at each receiver interface in order to support baseline services provided to consumer-owned cable-compatible digital TV receivers and other cable-compatible consumer devices that comply with the requirements of Part II. R4SC8WG12 -- CEA-818-E -- Cable Compatibility Requirements (Inactive) | 2010-10-18 | 2011-10-18* | Draft in Development | 50% |
page=projects&type=project | ||||
R4SC8WG12 -- CTA-679-C S-2018 -- National Renewable Security Standard
CEA-679-C describes the physical and electrical parameters of the interface for conditional access (CA) devices for consumer electronics (CE). It specifies the interface to a CA device that performs the signal access and, optionally, descrambling and key generation. This interface definition allows the entire CA system to be removable and hence replaceable. Very few constraints, if any, are placed on the CA system architecture. R4SC8WG12 -- CTA-679-C S-2018 -- National Renewable Security Standard (Inactive) | 2018-05-09 | 2019-02-01 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CTA-761-B S-201X -- DTV Remodulator Specification with Enhanced OSD Capability
CEA-761-B defines minimum specifications for a one-way data path utilizing an 8 VSB trellis or a 16 VSB | 2017-04-26 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CTA-796-A S-201X -- NRSS Copy Protection Systems
The copy protection systems included here are itemized for the purpose of identification. The systems | 2017-04-26 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CTA-799-A S-201X -- On-Screen Display Specification
This standard, CEA-799-A, specifies syntax and semantics for bitmapped graphics data typically used for on-screen display (OSD). CEA-799-A is applicable whenever it is necessary to specify a standard method | 2017-04-26 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- CTA-CEB5 S-201X -- Recommended Practice for DTV Receiver “Monitor” Mode Capability
CEA-CEB5-B provides recommendations to digital television (DTV) designers and manufacturers | 2017-04-26 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- Withdrawal of ANSI/CTA-775-C-R-2013 -- DTV 1394 Interface Specification
CTA-775-C defines mechanisms to allow a source of MPEG service, such as a cable or terrestrial set-top box, digital VCR, or DTV to utilize the MPEG decoding and display capabilities in a DTV. A method is included to allow the OSD Producer to supply bitmap graphic overlays for blending and composition in the DTV over decoded video. R4SC8WG12 -- Withdrawal of ANSI/CTA-775-C-R-2013 -- DTV 1394 Interface Specification (Inactive) | 2018-05-09 | 2018-12-17 | Withdrawn | 100% |
page=projects&type=project | ||||
R4SC8WG12 -- Withdrawal of ANSI/CTA-775.2-A-R-2013 -- Service Selection Information for Digital Storage Media Interoperability
CEA-775-C [1] standardizes the IEEE 1394 [3][4] High Performance Serial Bus interface for the Digital Television (DTV) receiver. A digital storage device such as a D-VHS or hard disk digital recorder may be used by the DTV or by another source device such as a cable set-top box to record or time-shift digital television signals. R4SC8WG12 -- Withdrawal of ANSI/CTA-775.2-A-R-2013 -- Service Selection Information for Digital Storage Media Interoperability (Inactive) | 2018-05-09 | 2018-12-07 | Withdrawn | 100% |
page=projects&type=project | ||||
R4SC8WG12-- Withdrawal of ANSI/CTA-849-B-R-2013 -- Application Profiles for CEA-775 Compliant DTVs
This standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C. R4SC8WG12-- Withdrawal of ANSI/CTA-849-B-R-2013 -- Application Profiles for CEA-775 Compliant DTVs (Inactive) | 2018-05-09 | 2018-12-07 | Withdrawn | 100% |
page=projects&type=project | ||||
R4SC8WG12--ANSI/CEA-849-B--Application Profiles for CEA-775 Compliant DTVs
This standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C. R4SC8WG12--ANSI/CEA-849-B--Application Profiles for CEA-775 Compliant DTVs (Inactive) | 2007-12-14 | 2008-10-03 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG12--ANSI/CEA-849-B-R-2013 -- Application Profiles for CEA-775 Compliant DTVs
This standard defines transport and content coding formats a compliant DTV shall support in order to inter-operate with various digital audio and video sources. A DTV compliant with this standard shall also comply with the requirements of CEA-775-C. R4SC8WG12--ANSI/CEA-849-B-R-2013 -- Application Profiles for CEA-775 Compliant DTVs (Inactive) | 2012-12-20 | 2013-06-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG13 -- CTA-2072 -- HDR Still Photo Interface
The project will develop standards for file formats including physical and electrical to support proper display of HDR still photos, including sequence mode photos, on TVs with HDR support. R4SC8WG13 -- CTA-2072 -- HDR Still Photo Interface (Inactive) | 2017-05-05 | 2019-01-17 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG5 -- ANSI/CEA-805-E -- Data Services on the Component Video Interfaces
This standard, ANSI/CEA-805-E, specifies how data services are carried on analog Component Video Interfaces (CVI), as described in CEA-770.2-C and CEA-770.3-C. CEA-805-D applies to all CE devices carrying data on the CVI vertical blanking interval (VBI). All CEA-805-E references to component video and/or component video interfaces are analog only, and no reference to digital is implied. R4SC8WG5 -- ANSI/CEA-805-E -- Data Services on the Component Video Interfaces (Inactive) | 2010-07-26 | 2013-05-17 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG5 -- ANSI/CTA-805-E R-2019 -- Data Services on the Component Video Interfaces
This standard, ANSI/CEA-805-E, specifies how data services are carried on analog Component Video Interfaces (CVI), as described in CEA-770.2-C and CEA-770.3-C. CEA-805-D applies to all CE devices carrying data on the CVI vertical blanking interval (VBI). All CEA-805-E references to component video and/or component video interfaces are analog only, and no reference to digital is implied. R4SC8WG5 -- ANSI/CTA-805-E R-2019 -- Data Services on the Component Video Interfaces (Inactive) | 2018-05-09 | 2019-10-22 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG5 -- CEA-770.3-E High Definition TV Analog Component Video Interface
This standard defines two raster-scanning systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate. The first image format specified is 1280 x 720 samples (pixels) inside a total raster of 750 lines, as given in Table 1. The second image format specified is 1920 x 1080 samples (pixels) inside a total raster of 1125 lines, as given in Table 1. Both image formats shall have an aspect ratio of 16:9. This standard specifies an analog i R4SC8WG5 -- CEA-770.3-E High Definition TV Analog Component Video Interface (Inactive) | 2012-09-21 | 2013-05-17 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG5 -- CTA-770.2-D S-201X -- Standard Definition TV Analog Component Video Interface
This standard defines the physical characteristics of an interface and the parameters of the signals carried across that interface, using three parallel channels for the interconnection of equipment operating with analog component video signals. R4SC8WG5 -- CTA-770.2-D S-201X -- Standard Definition TV Analog Component Video Interface (Inactive) | 2017-06-22 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG5 -- CTA-770.3-E R-201X-- High Definition TV Analog Component Video Interface
This standard defines two raster-scanning systems for the representation of stationary or moving two-dimensional images sampled temporally at a constant frame rate. The first image format specified is 1280 x 720 samples (pixels) inside a total raster of 750 lines, as given in Table 1. The second image format specified is 1920 x 1080 samples (pixels) inside a total raster of 1125 lines, as given in Table 1. Both image formats shall have an aspect ratio of 16:9. This standard specifies an analog i R4SC8WG5 -- CTA-770.3-E R-201X-- High Definition TV Analog Component Video Interface (Inactive) | 2017-06-22 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 - CTA-861.5 -- Audio Extension
This extension adds support for MPEG-H 3DA capabilities, ITU-R BS.2051 System H 22.2 multichannel sound, and adds support for audio coding extension types ATRAC-X, MPEG-4 ALS, and Auro-CX. R4SC8WG7 - CTA-861.5 -- Audio Extension (Inactive) | 2018-02-01 | 2018-08-28 | Voting | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- ANSI/CEA-861-F -- A DTV Profile for Uncompressed High Speed Digital Interfaces
ANSI/CEA-861-E establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs), digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related sources or sinks. R4SC8WG7 -- ANSI/CEA-861-F -- A DTV Profile for Uncompressed High Speed Digital Interfaces (Inactive) | 2011-07-11 | 2013-05-17 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- ANSI/CTA-861-G -- A DTV Profile for Uncompressed High Speed Digital Interfaces
ANSI/CTA-861 establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs), digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related sources or sinks. R4SC8WG7 -- ANSI/CTA-861-G -- A DTV Profile for Uncompressed High Speed Digital Interfaces (Inactive) | 2014-10-01 | 2017-03-09 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CEA-861-E Errata -- A DTV Profile for Uncompressed High Speed Digital Interfaces
CEA-861-E establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs), digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related sources or sinks. R4SC8WG7 -- CEA-861-E Errata -- A DTV Profile for Uncompressed High Speed Digital Interfaces (Inactive) | 2011-02-25 | 2011-07-20 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CEA-861.1 -- Audio Format Extensions -- Withdrawal
This standard specifies additional Audio Format Code Extension values for Audio InfoFrames and CEA Short Audio Descriptors using previously reserved codes listed in Table 26 of CEA-861-E [1]. This standard also defines additional data fields in the previously defined future bits of Data Byte 3 of CEA Short Audio Descriptors, when the Audio Format Code bit-field in Data Byte 1 is set to 15. Recommendations surrounding audio format extensions are also provided. R4SC8WG7 -- CEA-861.1 -- Audio Format Extensions -- Withdrawal (Inactive) | 2014-04-16 | 2017-06-21 | Withdrawn | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CEA-861.2 -- Advanced Audio Extension
Extension to CEA-861 that focuses on Object Audio. R4SC8WG7 -- CEA-861.2 -- Advanced Audio Extension (Inactive) | 2014-08-20 | 2015-08-24 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CEA-861.3 -- Static HDR Metadata Extension
Define a method for signaling high dynamic range video over the interface described in CEA-861-F, using the static metadata identified in the liaison communication. R4SC8WG7 -- CEA-861.3 -- Static HDR Metadata Extension (Inactive) | 2014-11-24 | 2015-07-10 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CTA-861-G Errata -
Errata to 861-G will allow for sending a Version 4 AVI InfoFrame to a sink device that supports any additional ACE colorimetric systems (ex: DCI-P3) signaled in the ACE fields of Table 9. R4SC8WG7 -- CTA-861-G Errata - (Inactive) | 2017-06-22 | 2017-09-07 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CTA-861-G Errata 2
The WG requests a project be started to create an Errata to CTA-861-G that addresses the following items: | 2018-04-16 | 2019-02-26 | Published | 100% |
page=projects&type=project | ||||
R4SC8WG7 -- CTA-861.3-A -- Static HDR Metadata Extension
Define a method for signaling high dynamic range video over the interface described in CTA-861-F, using the static metadata identified in the liaison communication. R4SC8WG7 -- CTA-861.3-A -- Static HDR Metadata Extension (Inactive) | 2016-02-09 | 2016-08-05 | Published | 100% |
page=projects&type=project | ||||
R4WG10 - ANSI/CTA-2038 S-202x, Command-Driven Analog IR-Synchronized Active Eyewear
Defines a standard method of Infrared (IR) emitter-to-eyewear signaling that provides a basis for interoperability between time-multiplexed (including stereographic and dual-mode) display systems manufactured by different manufacturers for use in the home. R4WG10 - ANSI/CTA-2038 S-202x, Command-Driven Analog IR-Synchronized Active Eyewear (Inactive) | 2022-03-25 | 2022-04-26 | Published | 100% |
page=projects&type=project | ||||
R4WG10 - ANSI/CTA-708-1 S-2022, Digital Television (DTV) Closed Captioning: 3D Extensions
This document specifies signaling to allow CTA-708 [1] caption services to be rendered with stereoscopic 3D program content. R4WG10 - ANSI/CTA-708-1 S-2022, Digital Television (DTV) Closed Captioning: 3D Extensions (Inactive) | 2022-03-25 | 2022-04-26 | Voting | 100% |
page=projects&type=project | ||||
R4WG10 - CTA-770-3-E (S-2022), High Definition TV Analog Component Video Interface
This standard defines two raster-scanning systems for the representation of stationary or moving two dimensional images sampled temporally at a constant frame rate. R4WG10 - CTA-770-3-E (S-2022), High Definition TV Analog Component Video Interface (Inactive) | 2022-03-25 | 2022-04-26 | Voting | 100% |
page=projects&type=project | ||||
R4WG10 - CTA-CEB-16-B(R202x), Active Format Description (AFD) & Bar Data Recommended Practice
CTA-CEB16-B makes recommendations to device makers on how devices can communicate information about the size of the video being used and optimize the viewer experience. R4WG10 - CTA-CEB-16-B(R202x), Active Format Description (AFD) & Bar Data Recommended Practice (Inactive) | 2022-03-25 | 2022-08-31* | Voting | 75% |
page=projects&type=project | ||||
R4WG10 - CTA-CEB21-A, Recommended Practice for Selection and Presentation of DTV Audio
Recommends the actions ATSC receivers with a single audio decoder should take in the presence or absence of AC-3 metadata carried in ATSC standards-based broadcasts. R4WG10 - CTA-CEB21-A, Recommended Practice for Selection and Presentation of DTV Audio (Inactive) | 2021-01-28 | 2021-03-19 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CEA-109-D R-2015, Intermediate Frequencies for Entertainment Receivers
CEA-109-D specifies Intermediate Frequencies (IFs) to be used in Standard Broadcast (AM), FM, and TV broadcast receivers. | 2014-09-04 | 2015-02-23 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CEA-2028-B -- Color Codes for Outdoor TV Receiving Antennas
This standard defines color codes to be associated with minimum performance parameters of outdoor television (TV) receiving antennas. When used in conjunction with the CEA TV antenna selector program at www.AntennaWeb.org, these color codes can help both consumers and professional installers select appropriate outdoor TV antennas for their particular reception environments. R4WG10 -- ANSI/CEA-2028-B -- Color Codes for Outdoor TV Receiving Antennas (Inactive) | 2013-08-15 | 2014-11-24 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CEA-2032-B -- Indoor TV Receiving Antenna Performance Standard
This standard defines test and measurement procedures for determining the performance of indoor TV receiving antennas. R4WG10 -- ANSI/CEA-2032-B -- Indoor TV Receiving Antenna Performance Standard (Inactive) | 2013-08-15 | 2014-11-24 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CEA-639 -- Consumer Camcorder or Video Camera Low Light
The purpose of this document is to specify the recommended method and test conditions to determine the low light sensitivity of consumer camcorders1 operating on the North American 525 line, 60 Hz NTSC color video standard. | 2014-09-04 | 2015-02-25 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CEA-774-C -- TV Receiving Antenna Performance Presentation and Measurement
This standard defines test and measurement procedures for use by manufacturers of television receive antennas who wish to categorize their antennas in accordance with CEA-2028-A, Color Codes for Outdoor TV Receiving Antennas, for use with the CEA TV Antenna Selector Program www.AntennaWeb.org. Essential elements include procedures to determine antenna gain, front-to-back ratio, average gain to null ratio, directivity and distortion performance of active antennas with integrated amplifiers. R4WG10 -- ANSI/CEA-774-C -- TV Receiving Antenna Performance Presentation and Measurement (Inactive) | 2013-08-15 | 2014-10-29 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-109-D S-2020, Intermediate Frequencies for Entertainment Receivers
CTA-109-D specifies Intermediate Frequencies (IFs) to be used in Standard Broadcast (AM), FM, and TV broadcast receivers. In CTA-109-D, the term Intermediate Frequency (IF) refers to the dominant interference-rejecting and passband-shaping circuits in receiver front-ends. R4WG10 -- ANSI/CTA-109-D S-2020, Intermediate Frequencies for Entertainment Receivers (Inactive) | 2020-05-13 | 2020-06-21 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-2020 S-201X, Other VBI Waveforms
This standard, CTA-2020, specifies four Vertical Blanking Interval (VBI) waveforms in commercial use. The electrical properties of the waveforms are covered, but the meaning of the payload data is not. The waveforms apply to 525-line, interlaced (i.e. 480i) analog television signals. The waveforms may be present on analog inputs and analog outputs, but no conformance requirements about the actual presence of the waveforms are defined in CTA-2020. R4WG10 -- ANSI/CTA-2020 S-201X, Other VBI Waveforms (Inactive) | 2019-05-31 | 2019-10-31* | Approved | 50% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-2028-B R-201X -- Color Codes for Outdoor TV Receiving Antennas
This standard defines color codes to be associated with minimum performance parameters of outdoor television (TV) receiving antennas. When used in conjunction with the CEA TV antenna selector program at www.AntennaWeb.org, these color codes can help both consumers and professional installers select appropriate outdoor TV antennas for their particular reception environments. R4WG10 -- ANSI/CTA-2028-B R-201X -- Color Codes for Outdoor TV Receiving Antennas (Inactive) | 2019-05-31 | 2019-12-20 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-2032-B R-201X -- Indoor TV Receiving Antenna Performance Standard
This standard defines test and measurement procedures for determining the performance of indoor TV receiving antennas. R4WG10 -- ANSI/CTA-2032-B R-201X -- Indoor TV Receiving Antenna Performance Standard (Inactive) | 2019-05-31 | 2019-12-20 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-608-E S-201X, Line 21 Data Services
CTA-608-E is a technical standard and guide for using or providing Closed Captioning services or other data services embedded in line 21 of the vertical blanking interval of the NTSC video signal. This includes provision for encoding equipment and/or decoding equipment to produce such material as well as manufacturers of television receivers which are required to include such decoders in their equipment as a matter of regulation (see Annex F). R4WG10 -- ANSI/CTA-608-E S-201X, Line 21 Data Services (Inactive) | 2019-05-31 | 2019-12-20 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-762-B S-202X, DTV Remodulator Specification
This standard defines minimum specifications for a one-way data path utilizing an 8-VSB trellis remodulator in compliance with ATSC A/53, Part 2:2007, ATSC Digital Television Standard Part 2 - RF/Transmission System Characteristics. This standard applies to any type of device used to connect to an ATSC compliant digital television (DTV) receiver. Devices meeting this standard should interoperate with any ATSC compliant receiver that also supports monitor mode. R4WG10 -- ANSI/CTA-762-B S-202X, DTV Remodulator Specification (Inactive) | 2020-05-13 | 2020-06-21 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-774-D -- TV Receiving Antenna Performance Presentation and Measurement
This standard defines test and measurement procedures for use by manufacturers of television receive antennas who wish to categorize their antennas in accordance with CTA-2028-A, Color Codes for Outdoor TV Receiving Antennas, for use with the CTA TV Antenna Selector Program www.AntennaWeb.org. Essential elements include procedures to determine antenna gain, front-to-back ratio, average gain to null ratio, directivity and distortion performance of active antennas with integrated amplifiers. R4WG10 -- ANSI/CTA-774-D -- TV Receiving Antenna Performance Presentation and Measurement (Inactive) | 2019-10-07 | 2020-06-21 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- ANSI/CTA-909-B R-2016 -- Antenna Control Interface
CTA-909-B describes an antenna control subsystem for receiving terrestrial transmissions. The primary use is to facilitate television reception. The receiver controls the antenna apparatus to optimize the signal automatically for best reception by adjusting its configuration. | 2015-08-06 | 2016-07-25 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CEA-CEB3 -- Recommended Practice for Camcorder Specifications Withdrawal
The Consumer Electronics Manufacturers Association (CEMA) was requested by its members to develop a Recommended Practice for the presentation of technical information for Camcorders and recording Video Cameras. The R-4.2 subcommittee found that that in current practice most manufacturers include a “ Specification page “ in the product’s Owner’s Manual. R4WG10 -- CEA-CEB3 -- Recommended Practice for Camcorder Specifications Withdrawal (Inactive) | 2013-08-15 | 2014-02-18 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CEA-CEB4 S-20XX, Recommended Practice for VCR Specifications
Recommended Practice for VCR Specifications R4WG10 -- CEA-CEB4 S-20XX, Recommended Practice for VCR Specifications (Inactive) | 2013-08-15 | 2014-02-18 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CEA-TVSB5 S-201X -- BTSC System Multichannel Television Sound Recommended Practice
These recommended practices on the BTSC system for multichannel television sound (MTS) have been prepared by the Ad hoc working Group of the Multichannel Sound Subcommittee's Steering Committee of the EIA Engineering Department's Broadcast Television Systems Committee. | 2014-09-04 | 2015-06-30 | Voting | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-2038 R-2017 -- Command-Driven IR-Synchronized Active Eyewear Standard
This standard describes a standard for eyeware that is required to view 3D content from displays. This document relates to both active and passive eyeware used in 3D consumer electronic systems in the home. In the case of active glasses, it standardizes interfaces, signaling, setup, control and polarization. R4WG10 -- CTA-2038 R-2017 -- Command-Driven IR-Synchronized Active Eyewear Standard (Inactive) | 2016-11-10 | 2017-04-21 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-23-B S-201X, Measurement Procedures for Determining Compliance with FCC Rules for "Cable-Ready Consumer Electronics Equipment
CTA-23-B defines the measurement procedures for determining compliance with FCC Rules for "Cable Ready Consumer Electronics Equipment", under 47 C.F.R. §15.118(c). R4WG10 -- CTA-23-B S-201X, Measurement Procedures for Determining Compliance with FCC Rules for "Cable-Ready Consumer Electronics Equipment (Inactive) | 2019-06-10 | 2020-03-30 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-542-D R-2018 -- Cable Television Channel Identification Plan
This standard designates identification numbers for 6 MHz channel frequency allocations for 158 channels up to 1002 MHz, with a method of specifying higher channel numbers. R4WG10 -- CTA-542-D R-2018 -- Cable Television Channel Identification Plan (Inactive) | 2018-01-16 | 2018-12-03 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-544-C S-201X, Low Frequency Immunity of Tuners in A Cable System
CTA-544-C defines the measurement procedures for the low frequency (5-54 MHz) immunity of tuners in a cable system, based on requirements in FCC regulations that define the assumed levels of the desired signal, low frequency interference and the required receiver immunity. These procedures define the specific tests needed to determine compliance with the requirements. R4WG10 -- CTA-544-C S-201X, Low Frequency Immunity of Tuners in A Cable System (Inactive) | 2019-06-10 | 2020-03-30 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-CEB12-B S-2020 -- DTV Recommended Practice for Locating and Navigating among ATSC Television Channels (Including PSIP Recommendations)
This bulletin, CTA-CEB12-B, provides guidance for the development and implementation of Advanced Television Systems Committee (ATSC) Program and System Information Protocol (PSIP)-compliant receivers, cable-ready DTV receivers, personal recorders and other consumer electronics devices. It includes recommendations and suggestions for device functionality. R4WG10 -- CTA-CEB12-B S-2020 -- DTV Recommended Practice for Locating and Navigating among ATSC Television Channels (Including PSIP Recommendations) (Inactive) | 2020-05-13 | 2020-06-21 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -- CTA-CEB20 S-201X -- A/V Synchronization Processing Recommended Practice
This Recommended Practice outlines the steps that an MPEG decoder should take to ensure and | 2018-01-16 | 2019-02-01 | Published | 100% |
page=projects&type=project | ||||
R4WG10 -ANSI/CTA-909-B R-2021, Antenna Control Interface
Describes an antenna control subsystem for receiving terrestrial transmissions. R4WG10 -ANSI/CTA-909-B R-2021, Antenna Control Interface (Inactive) | 2021-01-28 | 2021-04-09 | Voting | 100% |
page=projects&type=project | ||||
R4WG10-CTA-CEB25-B, Best Practices for Implementing Common Alerting Protocol (CAP) Based Alerts for Consumers Electronics Devices
Provides recommended practices, independent of delivery method, for CAP-encoded data usage among various consumer electronics devices that process CAP-encoded data. R4WG10-CTA-CEB25-B, Best Practices for Implementing Common Alerting Protocol (CAP) Based Alerts for Consumers Electronics Devices (Inactive) | 2021-06-16 | 2021-08-25 | Published | 100% |
* Estimated completion date
Copyright © 2023 Consumer Technology Association. All rights reserved.
Kavi®